Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MINI EMS2K - MS5150 - EWS3
31-12-2018, 13:02 PM,
Post: #3
|
|||
|
|||
RE: MINI EMS2K - MS5150 - EWS3
(16-12-2018, 10:48 AM)blax123 Wrote: How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?You need to read the whole 29f400 flash memory. There are a lot of tools that support this ECU. AFAIK, even old Galletto reads the full flash. (16-12-2018, 10:48 AM)blax123 Wrote: And which Tools/Software i need to flash a Software on the Bench using Winkfp and Code it afterwards with NCS? Will CantieCar do this job? Well you already answered your own question. WinKFP and a OBD cable. EMS2K and MS5150 are directly connected to DIAGBUS. It's K-Line, not CAN-Bus so no need for a Gateway. My two cents: Why MS5150? All the required changes for more power or even GP1 maps can be flashed to EMS2K... |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
MINI EMS2K - MS5150 - EWS3 - by blax123 - 16-12-2018, 10:48 AM
RE: MINI EMS2K - MS5150 - EWS3 - by user0086 - 31-12-2018, 11:23 AM
RE: MINI EMS2K - MS5150 - EWS3 - by o-dog - 31-12-2018, 13:02 PM
RE: MINI EMS2K - MS5150 - EWS3 - by user0086 - 31-12-2018, 13:43 PM
RE: MINI EMS2K - MS5150 - EWS3 - by blax123 - 31-12-2018, 15:04 PM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content