[Perry1991]

hello,

i have k-can cable,Ista-d its working no problem. now i want ista-p working but i have problem when i start all work bot i see error(look image)

reinstal ediabas 7.3 patched

Ista-d 4.12.12
ista-p 3.65
sp-daten v57

can you help me???

its most the problem??

thankyouu

[pico]

Buy icom and problem solved.

[cornel18]

I have the same problem and I'm using icom next. I just cant figure this out

[Perry1991]

I have icom but its the same problem

---

My i-level its changed for the cic i think that its problem but how i can change my i-level back? I have the data what it is orginal!

[LBDT]

sp-daten v57 is very old, here you will find v66, first try to change that

Is your latency set to 1ms? is your cable a modern FT232RQ?

I always use ISTA-P with K+DCAN no problem.

[Perry1991]

I have now v66 and a icom but its not solved! I think my i-level its changed for the cic i think thats the problem, but how i most the i level change back, i dont know it

[LBDT]

have to tried this?

http://blog.obd2diy.fr/2017/09/07/solved...on-failed/

[lustek]

Try disableing firewall and antivirus

[Perry1991]

Its disable that