Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opel BCM read
08-01-2019, 18:18 PM,
Post: #11
|
|||
|
|||
RE: Opel BCM read
So only with these cables it does not work unfortunately
|
|||
08-01-2019, 18:28 PM,
Post: #12
|
|||
|
|||
RE: Opel BCM read
connect carprog to external voltage and check if you have +5V on red wire had some adapters where red was other pin and rose was +5v
|
|||
Reputation: +1 - dabaca [+1] | |||
08-01-2019, 19:20 PM,
Post: #13
|
|||
|
|||
RE: Opel BCM read
Unfortunately, I get no connection when a 12V power supply is connected And unfortunately come in red no 5V out whether with or without power supply.
However, when I measure red and brown, I have 4.89V |
|||
08-01-2019, 20:15 PM,
Post: #14
|
|||
|
|||
RE: Opel BCM read
(08-01-2019, 19:20 PM)OpelVecci Wrote: Unfortunately, I get no connection when a 12V power supply is connected And unfortunately come in red no 5V out whether with or without power supply. Check RST and BKGD you have wrong wires Carprog have different colours than orange |
|||
09-01-2019, 16:18 PM,
Post: #15
|
|||
|
|||
RE: Opel BCM read
Hello, thanks so funktiniert, can I reset the MCU on this way so that it is back to factory condition? The code is 6754?
|
|||
09-01-2019, 17:41 PM,
Post: #16
|
|||
|
|||
RE: Opel BCM read
I've come to the conclusion that this is the right pin, but the control unit does not take over the settings and writes to me at Op Com something with an MDI or MID error
|
|||
10-01-2019, 17:05 PM,
Post: #17
|
|||
|
|||
RE: Opel BCM read
|
|||
11-01-2019, 20:03 PM,
Post: #18
|
|||
|
|||
RE: Opel BCM read
Does not anyone have a tip for me?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content