Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flash FRM module with e-sys
05-01-2019, 19:34 PM,
Post: #1
|
|||
|
|||
Flash FRM module with e-sys
I bought used FRM “ 61356992947 " from eBay for my F10 2011
I’m trying flash it but fail ! I used vcm to find I-Step (shipm) “F010-06-410” but in tal calculating I not found my car I-Step so I try select "F010-06-500" I got red hwel for FRM only I chose HW-IDs from SVTactual then when try flash it I got this error: "job failed with negative response error repeat job description: Service RD returned a negative response with response code requestOutOfRange” Any idea about solve it? |
|||
05-01-2019, 20:43 PM,
Post: #2
|
|||
|
|||
RE: Flash FRM module with e-sys
You have calculated wrong tal for this FRM. HWEL must be black after calculation. If you know VIN of that car you can pick I-step with similar date then calculate again until you get HWEL in BLACK
|
|||
05-01-2019, 20:44 PM,
Post: #3
|
|||
|
|||
RE: Flash FRM module with e-sys
It’s wrong frm. For your car.
| BimmerFiks AS | Instagram | |
|||
05-01-2019, 20:46 PM,
(This post was last modified: 05-01-2019, 20:50 PM by chang2.)
Post: #4
|
|||
|
|||
RE: Flash FRM module with e-sys
Hello,
hwel is not correct! check SA thanks - FSC Apple CarPlay for NBT Evo Fullscreen and MGU OEM
- FSC-Set for Retrofit CiC, NBT and NBT Evo with USB 18-11 or remote - FSC Kafas BE, BF and 7E SLI, Kafas4 Speedlimit 11F, WWA 13, FCW 13F - VIM for NBT Evo, install with USB 18-11 or remote - FSC for BMW Apps, Sirius Radio, EPS ------------- Location is Germany |
|||
05-01-2019, 21:14 PM,
Post: #5
|
|||
|
|||
RE: Flash FRM module with e-sys
hi
calculated FW not compatible with your VIN data you need check VIN SA codes if its change module , not compatible with your car |
|||
06-01-2019, 15:07 PM,
Post: #6
|
|||
|
|||
RE: Flash FRM module with e-sys
Thanks for all
I found the donor car :2013 BMW 7 series Is there any method to make this module works in my car ? if try read microprocessor using x prog and write another firmware Can will work? |
|||
06-01-2019, 15:35 PM,
Post: #7
|
|||
|
|||
RE: Flash FRM module with e-sys
if part is wrong it won't work simple as that. If it doesn't work after coding it won't work at all
|
|||
Reputation: +1 - Gmmdi911 [+1] | |||
07-01-2019, 06:37 AM,
Post: #8
|
|||
|
|||
RE: Flash FRM module with e-sys
(06-01-2019, 15:07 PM)a1m1m1a1r1 Wrote: Thanks for all Only if the chip is the same. If it is not, FRM will brick. Get compatible FRM |
|||
07-01-2019, 08:20 AM,
Post: #9
|
|||
|
|||
RE: Flash FRM module with e-sys
(06-01-2019, 15:07 PM)a1m1m1a1r1 Wrote: Thanks for all press " HW-IDs from SVTactual " , if those 2 green arrows next to FRM are disappeared then you might be OK and you will be able to flash the FRM and code it too , even Hardware is different for your car . there is 99% chance that it will work . give it a try . |
|||
07-01-2019, 08:45 AM,
Post: #10
|
|||
|
|||
RE: Flash FRM module with e-sys
I wouldn't do it, it will lose firmware
BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content