Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
I HYUNDAI COUPE - NOT START
|
14-01-2019, 17:04 PM,
Post: #1
|
|||
|
|||
|
I HYUNDAI COUPE - NOT START
Hi,I have hyuHyun coupe 2.7 petrol 2005
The engine crank but not start Front window not working On diagnostic can't connect to bcm and ecu remove the bcm and find small water marks on bottom of the board and two pins It's comonc fault of the car ??? Any ideas- experience ??? Thanks |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
14-01-2019, 17:20 PM,
Post: #2
|
|||
|
|||
|
RE: I HYUNDAI COUPE - NOT START
Did you check power & grounds as well as com lines? Do you have comunication with the ecm when the body is disconnected?
An expert is someone who knows each time mor on each time less, until he finally knows absolutely everything about absolutely NOTHING.
|
|||
|
|
|
14-01-2019, 22:15 PM,
Post: #3
|
|||
|
|||
|
RE: I HYUNDAI COUPE - NOT START
I find guy on ebay - repair the fault if I send the bcm to him
his write that is common problem in the car so posible fault is on relay or just connection on the board ?? I see some water damage in two points on the board - any experience ???? |
|||
|
|
|
15-01-2019, 09:56 AM,
(This post was last modified: 15-01-2019, 15:41 PM by Commander.)
Post: #4
|
|||
|
|||
|
RE: I HYUNDAI COUPE - NOT START
I checked and I have power to the bcm but bcm don't disturb power to windows relay, indicators .... and to other control modules
Any ideas Wiring diagram ? Thanks |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
