Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ATM - NBT EVO - bench stup - help needed
11-02-2019, 21:20 PM,
Post: #1
|
|||
|
|||
ATM - NBT EVO - bench stup - help needed
I've got an EVO with matching ATM on the bench - I can see the ATM in esys, in the connected drive menu I can see Roadside assistance but I cannot see any other items and the Update BMW Services item is greyed out - there are no antennas plugged into the ATM - does it need any (GPS aside) for the online stuff to work?
Need to get this working so willing to pay for info/help if it actually gets it up and running correctly. |
|||
12-02-2019, 05:47 AM,
Post: #2
|
|||
|
|||
RE: ATM - NBT EVO - bench stup - help needed
For online services to function, you definitely need at least one of the two GSM antennas to be connected, ideally to a real antenna.
As a note, you'll see the ATM in e-sys if KCAN2 is connected, but for the update bmw services item to come up you need a working OABR ethernet link. Do you have a gateway on your bench setup? If yes, you should be able to load ISTA+, connect to the gateway, and then check for error codes on the ATM... that should tell you if the ethernet link is up. |
|||
12-02-2019, 08:25 AM,
(This post was last modified: 12-02-2019, 08:26 AM by BugFix.)
Post: #3
|
|||
|
|||
RE: ATM - NBT EVO - bench stup - help needed
On bench will work fine without any antennas
Please read status Tool32 --> ATM.prg --> STATUS_LESEN Argument: ARG;LAST_CONNECTION_TEL Tool32 --> NBTEVO.prg --> STATUS_LESEN Argument: RG;STATUS_GPS NBTEVO, ENAV2, MGU - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change NCD Secure Coding 2.0 |
|||
12-02-2019, 08:44 AM,
Post: #4
|
|||
|
|||
RE: ATM - NBT EVO - bench stup - help needed
^ thanks for this, much easier than messing with ISTA...
I wasn't able to get the various online services apps working until I had a working antenna connected... maybe my neighborhood has weak cell signals. But the main issue I was having was a miswired OABR enet link. @Wibbles: Once you get your bench setup going, lets see the output of those two status lines |
|||
12-02-2019, 08:56 AM,
(This post was last modified: 12-02-2019, 08:57 AM by Wibbles.)
Post: #5
|
|||
|
|||
RE: ATM - NBT EVO - bench stup - help needed
(12-02-2019, 08:25 AM)BugFix Wrote: On bench will work fine without any antennas Can you send me a link to the ATM.prg file - i don't have it in my Too32 install. Once I have that I will read out the errors. I connected 2 of the BMW wifi antennas to the ATM this morning and the "Update BMW Services" was available - I selected that and it said it was transferring data but nothing else appeared in the Connected Drive Menu. My bench setup has a ZGW on it and works great with all headunits. I'm using the Carsystems Can wakeup device from customretrofit. (12-02-2019, 08:44 AM)vilord Wrote: But the main issue I was having was a miswired OABR enet link. My bench setup was miswired as well - might be worth me checking that |
|||
12-02-2019, 09:18 AM,
(This post was last modified: 12-02-2019, 09:21 AM by BugFix.)
Post: #6
|
|||
|
|||
RE: ATM - NBT EVO - bench stup - help needed
ATM.prg
NBTEVO.prg \Rheingold\Ecu\ "Update BMW Services" - from tool32 Tool32 --> NBTEVO.prg --> STEUERN_ROUTINE ARG;PROVISIONING;STR Tool32 --> NBTEVO.prg --> STEUERN_ROUTINE ARG;PROVISIONING;RRR |