Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to change Battery to 100Ah to E60
12-02-2019, 10:22 AM,
Post: #1
|
|||
|
|||
How to change Battery to 100Ah to E60
Hi
I had to change my battery yesterday from a Genuine Battery 90Ah to A Bosch S019 100Ah. Now i registered the battery using Ista D but cant seem to change the 100Ah. Any help would be appreciated |
|||
12-02-2019, 10:28 AM,
Post: #2
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
for E60 , you can change to normal ( non AGM ) 110Ah only .
E B080 BATTERIE_80AH //80 Ah-Batterie E B090 BATTERIE_90AH //90 Ah-Batterie E B110 BATTERIE_110AH //110 Ah-Batterie E A090 BATT_AGM_90AH //90 Ah-AGM Batterie (SA536) E A080 BATT_AGM_80AH //80 Ah-AGM Batterie but you can stick to 90Ah configuration , not a big difference and your car will do just fine . if you want to change your battery configuration then you need to edit the FA with NCS , Ista D doesn't have this option. |
|||
12-02-2019, 10:47 AM,
Post: #3
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
(12-02-2019, 10:28 AM)emhtuning Wrote: for E60 , you can change to normal ( non AGM ) 110Ah only . Thank you. I have to reinstall inpa again as it only showing me MASK no CAS option to code. Carly gives me the option of registering as 95AH |
|||
12-02-2019, 10:57 AM,
Post: #4
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
There is no 95Ah on E60. Don't know about carly. I would stay at 90Ah to avoid situations when car thinks there is enough juice left in a battery when in reality there is not.
|
|||
12-02-2019, 11:02 AM,
Post: #5
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
(12-02-2019, 10:57 AM)Node Wrote: There is no 95Ah on E60. Don't know about carly. I would stay at 90Ah to avoid situations when car thinks there is enough juice left in a battery when in reality there is not. Thanks mate, Yes you are right, i will leave it at 90Ah. My battery was never changed and only found out how old it was by looking at the terminal engraved with date. |
|||
12-02-2019, 12:57 PM,
Post: #6
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
There is also an option in ISTA-P to register the correct battery, if someone prefer that way.
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
12-02-2019, 13:50 PM,
Post: #7
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
Yes, but you still have the same choises.
|
|||
12-02-2019, 17:13 PM,
Post: #8
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
(12-02-2019, 12:57 PM)Matthew53 Wrote: There is also an option in ISTA-P to register the correct battery, if someone prefer that way. (12-02-2019, 13:50 PM)Node Wrote: Yes, but you still have the same choises. offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . NCS can change FA in 30 seconds , and code full car in 1 minute . |
|||
13-02-2019, 11:28 AM,
Post: #9
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
(12-02-2019, 17:13 PM)emhtuning Wrote: offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . In ISTA/P, at least AOS version, You can disable all measures plan's and go directly to battery coding. Yes it still takes a "bit" more time than doing same with ncs... And with F-series, same story, but only doing same with ISTA next. I haven't figured out yet how to do it with esys. All the cars till today have been only new battery registering, which is peace of cake with Ista. |
|||
13-02-2019, 11:35 AM,
Post: #10
|
|||
|
|||
RE: How to change Battery to 100Ah to E60
(13-02-2019, 11:28 AM)jaki Wrote:(12-02-2019, 17:13 PM)emhtuning Wrote: offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . Esys procedure is exactly same as NCS , in Esys FA editor can also be done in no time . |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
CIC Exx and Fxx change language in CZ? | chang2 | 23 | 6,279 |
5 hours ago Last Post: Edi-son |
|
EVO HW.5.1 brick after region change/ V850 | Satia | 11 | 628 |
8 hours ago Last Post: Mwahab |
|
NBT EVO HDD change tutorial | RuleNormaliai | 19 | 2,583 |
26-04-2024, 17:23 PM Last Post: grizzle |
|
BMW G30 48V battery no charge - how to fix ? | shaggyshadow | 4 | 357 |
16-04-2024, 21:06 PM Last Post: tito2002 |
|
buy solution for change ISN for MG1 and MD1 | dfb | 0 | 217 |
15-04-2024, 00:21 AM Last Post: dfb |
|
F90 Li-Ion battery reset | Hoborg | 17 | 1,743 |
05-04-2024, 19:44 PM Last Post: TheNine90 |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 174 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
[Question] Change X1 F48 gearbox | jaramillo | 9 | 1,485 |
24-03-2024, 21:27 PM Last Post: masa52 |
|
Battery lead positive underfloor problem | da.2022 | 10 | 317 |
24-03-2024, 09:38 AM Last Post: pupu144 |
|
G20- Higher capacity battery coding | hallamnet | 2 | 380 |
19-03-2024, 07:06 AM Last Post: MasterGt |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content