Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess v2 EDC15P+ error
25-02-2019, 18:56 PM,
Post: #11
|
|||
|
|||
RE: Kess v2 EDC15P+ error
|
|||
25-02-2019, 20:54 PM,
Post: #12
|
|||
|
|||
RE: Kess v2 EDC15P+ error
(25-02-2019, 16:48 PM)matuuu Wrote: Same error.. AFN is too old for obd, it is MSA15 ecu. |
|||
25-02-2019, 21:16 PM,
Post: #13
|
|||
|
|||
RE: Kess v2 EDC15P+ error
i have the same problemes , i just click OK to proceed anyway, an was fine, read write, wthout any problems
skoda superb 1.9 2003 edc15p+ |
|||
25-02-2019, 21:34 PM,
Post: #14
|
|||
|
|||
RE: Kess v2 EDC15P+ error
(25-02-2019, 20:54 PM)Rov Gti Wrote:(25-02-2019, 16:48 PM)matuuu Wrote: Same error.. Maybe the 2000 Passat B5 with AJM engine 1.9TDI 85KW PD is also too old? |
|||
25-02-2019, 21:59 PM,
(This post was last modified: 25-02-2019, 22:01 PM by Rov Gti.)
Post: #15
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Old only for this engine. Try to use cip 29F boot pin( boot pin and 1 kohm to ground, ignition on, wait 5 sec, remove connection and start reading)
|
|||
27-02-2019, 21:19 PM,
Post: #16
|
|||
|
|||
RE: Kess v2 EDC15P+ error
I think maybe my kess sdcard is faulty..
Ćant read 3C Passat BKP engine, wakeup error. I try another sdcard and clean connections. |
|||
27-02-2019, 22:33 PM,
Post: #17
|
|||
|
|||
RE: Kess v2 EDC15P+ error
use Mpps Boot for this ECU
|
|||
05-03-2019, 20:19 PM,
Post: #18
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Can i read the tuned file one car and write it to another car?
Example E46 330d M57D30 stage 1 to E39 530d M57D30? Or need to modify every ecu original file? Can someone explain me what/where i need to change. |
|||
05-03-2019, 20:28 PM,
Post: #19
|
|||
|
|||
RE: Kess v2 EDC15P+ error
you need to match hw / sw numbers ect maybe even transmission type (wait for a pro to answer) , also the m57 has a few variations, I flashed my alhambra with a sharan file and all was ok but could not re-flash through obd anymore, flashed in boot mode with the original file and now all is ok again.
I actually have a stage 1 bluefin on my lci e60 530d but pretty sure that will have some sort of protection or would read and share with the forum. |
|||
02-04-2019, 06:03 AM,
Post: #20
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Now i have problem to read e39 530d ecu, same error unknown ecu.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content