[johnchow]

Any others FSC U can use for KAFAS2,no need emulator. No official sell for KAFAS FSC,they just cheat money.

[DayvG]

Any others FSC U can use for KAFAS2,no need emulator. No  official sell for KAFAS FSC,they just cheat money.

So are you saying that any FSC set/code from any KAFAS2 system regardless of VIN can be used with a retrofitted KAFAS2 system without the need for an emulator?

[johnchow]

Yes,Mine is F018 year 2013, and used F01 760 FSC for KAFAS2, works perfectly

[DayvG]

So I have managed to get the Gen 1 version of Park Assist working using the early version PMA and the correct coding. The problem I have now is since installing the separate PDC and JBE by PDC button on the dash is unresponsive and only illuminates when in reverse. This means I have to select reverse to activate Park Assist or PDC/Top View/Reverse Cam. Before I reinstall my original JBE can anyone help with FDL coding that may bring the PDC button back to life? With the V5.4 ICM (that causes Restraint Faults) the PDC button works as it should by pressing so I am expecting this to be an issue between PDC/ICM versions. As the ICM CAFDs are the same but the 2 PDC ones are different I'm hoping its there somewhere but I have no idea what values to search for.

to solve the problem on the airbag you have to add two more cables between icm and acsm, after reset errors you will see you lose

Attached to the aelectric scheme

Thank you thank you thank you!!!

I just went out, ran the twisted pair properly and neatly, went through full system start up including ride height and the error has gone!!

Larshutten did tell me to run the twisted pair weeks ago but it was the sensor start up with them connected that I was missing! I feel like such an idiot!! You live and learn. Thanks everyone, admin please mark as solved, thank you.