Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F54 Mini PDC Not Working after crash replacement
09-03-2019, 02:08 AM,
Post: #1
|
|||
|
|||
F54 Mini PDC Not Working after crash replacement
I have F54 after front crash, replaced all front PDC sensors and ran ISTA/P for headlight change which reprogammed all modules and mucked up HUD Theft Protection!! Now PDC Failure error. ISTA P cleared errors but consistently has error front left left centre right and right centre Sensors. Right right and left left sensors are working and test OK in ISTA. All sensors clicking when operating PDC Manually. I tracked all wires in loom from front connector to rear PDC control unit and all OK, no short circuit everything good. ISTA reports errors - short circuit to ground or open circuit on each of the 4 sensors. Interesting in ISTA test distance says - no sensor fitted. If I remove a working sensor like rear or left left it says error 511 (i.e. not say no sensor fitted). There is also sensor fault: programming error showing on each front sensor. I think somehow car thinks it has option but no sensors. FA is as per original I think. Any ideas what steps to program with E-Sys ? Change Date? Sorry long post.
|