[bmwcoder75]

Hi,

I have a EVO unit which gives me FSC Cancel status hours after it was patched.

My bench is fine, was done in car directly, VIN matching.

Works for a bit, NAV etc, then after a while all FSC are cancelled. I use HU Tool BIN patch. Not the issue here.

Patch is applied properly, all FSC are loaded manually too (Auto and manual, same results)

Component Protection is not active. Unit had v850 reset too and I flashed again to 11.2017.
Worked for 2h, just sitting on the bench with CAN Filter, then next day I turn it on, all FSC are cancelled.

I suspect that unit had too many VIN changes maybe.

Any way to fix this?

Thanks

[bmwcoder75]

Any idea guys...?

[duckdonald]

chw HW is it?
if it is HW 3.1, after reset 850, update with V59.0.6, and enter fsc, .. check if they remain active

[bmwcoder75]

HW 2.3 converted to ID5
I think I will reset to ID4 and see what happens there

[Vithy]

Is the unit north american? If so i have seen this happen before.

Took a NA NBT (2.3) used 850 and flashed it to ID5. I think the reason is 850 flash file has ECE image in it (QNX side). I think we used region change for it to work, sorry don't remember exactly. It also had something to do with SAT radio on a Euro Image.

Let me know

HW 2.3 converted to ID5
I think I will reset to ID4 and see what happens there