Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DME pin out for bosch me 7.8
16-03-2019, 10:31 AM,
Post: #1
|
|||
|
|||
DME pin out for bosch me 7.8
please help with pin out for this dme
photo attached. ECU Bosch 0 261 206 579 996.618.604.00 Cheers |
|||
16-03-2019, 10:52 AM,
(This post was last modified: 16-03-2019, 10:57 AM by ROD-BENDERS.)
Post: #2
|
|||
|
|||
RE: DME pin out for bosch me 7.8
(16-03-2019, 10:31 AM)salaausi Wrote: please help with pin out for this dme With immo off file you say car start once then not again. Did you read the eprom again to see if it had changed back ? If it changed back you need to write protect the immo off file then it should work All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
16-03-2019, 22:54 PM,
(This post was last modified: 17-03-2019, 00:07 AM by salaausi.)
Post: #3
|
|||
|
|||
RE: DME pin out for bosch me 7.8
(16-03-2019, 10:52 AM)ROD-BENDERS Wrote:(16-03-2019, 10:31 AM)salaausi Wrote: please help with pin out for this dme I'm actually looking for complete pin out for this DME connector. Is it possible to find complete pin out? I checked the file in eeprom after 1st start. YES it changed only one LINE. How do I write protect the immo off file? (I attached a photo of the changes) Also If I disconnect the battery positive for 1-2 min and then try to start it starts again. But only once. Can't keep doing this for ever. Crazy! Do I need to change any file in the Immobilizer alarm unit or Main MCU also?(which is located under the front passenger seat) What I feel is there is somewhere in the MCU or FLASH stored immo part also. I have Full read the ECU file from KTAG. Can you please check if there any chance of get immo off from the ECU full read file. Cheers. |