Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ista 4.19.21 + icom next
26-09-2019, 07:29 AM,
Post: #11
|
|||
|
|||
RE: ista 4.19.21 + icom next
(25-09-2019, 19:49 PM)snypertje Wrote: Can this also be the same problem as in post 1 and you solved it by battery reset? Interesting. But in my case I dont think it could be a problem cars were connected to PSU and have stable 13,8V. |
|||
26-09-2019, 11:03 AM,
Post: #12
|
|||
|
|||
RE: ista 4.19.21 + icom next
(26-09-2019, 07:29 AM)BobbySD Wrote:I had problems with 4.19.21 and now use 4.17.30 and did with this version battery reset.(25-09-2019, 19:49 PM)snypertje Wrote: Can this also be the same problem as in post 1 |
|||
26-09-2019, 14:57 PM,
Post: #13
|
|||
|
|||
RE: ista 4.19.21 + icom next
Today i had problems with f15 coding hu with 4.17.30
After that i used 4.19.21 and coding hu without problems. Very strange. Before i used 4.19.21 on f31 and problems coding hu, and 4.17.30 works fine on that car. |
|||
26-09-2019, 17:58 PM,
Post: #14
|
|||
|
|||
RE: ista 4.19.21 + icom next
I tried to connect via cable and wifi, through a router and directly. I connected different icom next and icom2, but such a message still appears in versions 4.19.xx
With versions 4.18.xx there is no such thing. I get this message at the moment "Read current vehicle context" |
|||
27-09-2019, 18:58 PM,
Post: #15
|
|||
|
|||
RE: ista 4.19.21 + icom next
(26-09-2019, 17:58 PM)ferrum Wrote: I tried to connect via cable and wifi, through a router and directly. I connected different icom next and icom2, but such a message still appears in versions 4.19.xx thats the same Ive got. And with this message most units cant be flashed with error interminent connection lost. I have 4.18 on another pc but I dont have the car at that place so I have to flash most units with esys. But this is strange. I would like to have it working. Hopefuly it will be solved in newer version of ista. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content