[Jancss]

Hi all,
need help with car Renault trafic 2.5 tdi.   Before car have automatic gearbox, now it is changed to manual. With car is possible to drive, but just in limp mode ...till 2800 rpm..
Here need make ecu remapp or adaption?

Need solution to possibilty drive normaly.

Thanks in advance

[rightpcb]

You try changing configuration with clip ?

[Jancss]

Till this moment nothing is changed in ecu or somewhere else , just changed gearbox with it module and wiring. I think ecu not correct understand what of gearbox is added.

[Jurebv]

You need adaptation change but you could also remove limp mode but its not right way to do it

[Jancss]

Ok, but what here is right way to do all correct? And which tool here will be better to use?

[Jurebv]

renault can clip should be able to do it, if you dont have it post ur file here i can remove limp mode in flash

[Jancss]

I havnt renault clip..car have bosch ecu edc16cp33 ..can i read it with mpps v18 or need ktag?
So, what about gearbox, because now diagnostics see autonatic gearbox, but really car now have manual.
Also now happen strange symptom. To see what type of ECU car I disconnect one connector(near ecu metal box) , not ECU and after that injectors from memory lose coding numbers.