Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EVO Unit keeps getting FSC Cancelled (NO CP)
13-04-2019, 15:09 PM,
Post: #1
|
|||
|
|||
EVO Unit keeps getting FSC Cancelled (NO CP)
Hi,
I have a EVO unit which gives me FSC Cancel status hours after it was patched. My bench is fine, was done in car directly, VIN matching. Works for a bit, NAV etc, then after a while all FSC are cancelled. I use HU Tool BIN patch. Not the issue here. Patch is applied properly, all FSC are loaded manually too (Auto and manual, same results) Component Protection is not active. Unit had v850 reset too and I flashed again to 11.2017. Worked for 2h, just sitting on the bench with CAN Filter, then next day I turn it on, all FSC are cancelled. I suspect that unit had too many VIN changes maybe. Any way to fix this? Thanks |
|||
16-04-2019, 10:48 AM,
Post: #2
|
|||
|
|||
RE: EVO Unit keeps getting FSC Cancelled (NO CP)
Any idea guys...?
|
|||
16-04-2019, 11:51 AM,
Post: #3
|
|||
|
|||
RE: EVO Unit keeps getting FSC Cancelled (NO CP)
chw HW is it?
if it is HW 3.1, after reset 850, update with V59.0.6, and enter fsc, .. check if they remain active BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
16-04-2019, 11:55 AM,
Post: #4
|
|||
|
|||
RE: EVO Unit keeps getting FSC Cancelled (NO CP)
HW 2.3 converted to ID5
I think I will reset to ID4 and see what happens there |
|||
22-04-2019, 16:20 PM,
(This post was last modified: 22-04-2019, 16:21 PM by Vithy.)
Post: #5
|
|||
|
|||
RE: EVO Unit keeps getting FSC Cancelled (NO CP)
Is the unit north american? If so i have seen this happen before.
Took a NA NBT (2.3) used 850 and flashed it to ID5. I think the reason is 850 flash file has ECE image in it (QNX side). I think we used region change for it to work, sorry don't remember exactly. It also had something to do with SAT radio on a Euro Image. Let me know (16-04-2019, 11:55 AM)bmwcoder75 Wrote: HW 2.3 converted to ID5 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
E60 DSC unit, Cruise+brake vs ACC2 stop and go | GoNz0- | 4 | 202 |
29-03-2024, 09:11 AM Last Post: GoNz0- |
|
reset gps evo unit tool32 | Fx82 | 3 | 829 |
04-03-2024, 20:20 PM Last Post: Cerhio |
|
MGU UNIT need to repair | eprst | 8 | 1,298 |
11-02-2024, 12:29 PM Last Post: eprst |
|
G05 - Kafas4: 025D0B -control unit not coded for the vehicle | Semi14 | 19 | 2,298 |
31-01-2024, 21:40 PM Last Post: d.martynov |
|
Simulate inputs on the head unit MGU | anton.maier | 5 | 406 |
27-01-2024, 11:25 AM Last Post: anton.maier |
|
NBT display on bench without unit | djordan | 4 | 377 |
15-01-2024, 08:08 AM Last Post: Powerlab |
|
SOS error. B7F33C TCB: Internal Control Unit Fault | TIGHTFIN | 4 | 516 |
26-12-2023, 09:38 AM Last Post: DEJMIEN |
|
Secure coding in BMWs (unit list) | Node | 82 | 14,309 |
06-11-2023, 16:04 PM Last Post: Node |
|
BMW F20 engine control unit broked | Partizaniukas | 9 | 536 |
02-11-2023, 14:52 PM Last Post: Hoborg |
|
Add the ICM unit to bench setup | Haug530d | 6 | 629 |
04-09-2023, 18:10 PM Last Post: Haug530d |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content