[donke]

After replacing retrofit LED corona lights with normal H8 light bulbs the bulbs on the 7 series f01 will not work. Sometimes the lights will be on, but later they are off. (don't ask why the car is now equipped with the old halogen bulbs at the moment).

I've tried to find the reset_kurzschluss job on tool32, but I cannot find it for the frm3.prg, only for the older e-model frm-files.

Is there a possibility to get the h8 bulbs working?

[duckdonald]

use ista+ now is possible the reset.

[alfio76]

with ista+ you can reset the short circuit counter, with a service procedure

[Spirit5676]

Does the same work for F25? Maybe I'm blind, but I couldn't find it in ISTA+.

[acolt]

simply use tool32, there you have the option to do it in 30 sec, instead of ista

[Bimmer540]

Can you explain how to do it with tool32

[Spirit5676]

simply use tool32, there you have the option to do it in 30 sec, instead of ista

I've done it numerous times on E-series with tool32, but couldn't get it done on F25. Any information on how to do it with tool32 on F-series?