Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E46 engine swap problem
17-04-2019, 18:34 PM,
Post: #1
|
|||
|
|||
E46 engine swap problem
I have question, in my e46 I changed the engine from 2.5 to 2.2, since then the gearbox works strangely, after changing the gear there is no power and the revolutions are falling and after 2 sec goes up. Could this be the fault of the software? It was m54b25, it is b22, the gearbox is changed too. When i diagnose car by the ista threre is still m54b25, could this be the problem?
|
|||
17-04-2019, 19:37 PM,
Post: #2
|
|||
|
|||
RE: E46 engine swap problem
Maybe you need to reprogram the EGS with a different version.
WinKFP should do this. |
|||
17-04-2019, 19:42 PM,
Post: #3
|
|||
|
|||
RE: E46 engine swap problem
Reprogram DME and EGS.
| BimmerFiks AS | Instagram | |
|||
18-04-2019, 15:13 PM,
Post: #4
|
|||
|
|||
RE: E46 engine swap problem
If you can help me which number zusb to choose. The gearbox would fit me 7529010. To dme 7545416 but I have removed the air pump and installed lpg so I think over the eu2 software and then the number is 7529010.
I will be very graceful if you confirm me. |
|||
18-04-2019, 20:09 PM,
Post: #5
|
|||
|
|||
RE: E46 engine swap problem
DME 7545418 ( No kat or no EOBD or EU2 ) up 2005
Gearbox is correct 7529010 |
|||
19-04-2019, 10:25 AM,
(This post was last modified: 19-04-2019, 18:05 PM by xssnake.)
Post: #6
|
|||
|
|||
RE: E46 engine swap problem
Do I need to do something else after the flash? Or just reset adaptation?
Will I need an ews-dme synchronization in e46? I still have a question about switching to EU2, do I have to remove the fuse from the pump and probe heating? And last question, after coding this in ista there will be b22 and if not what to do to see engine that is mounted now in car? |
|||
25-04-2019, 13:18 PM,
Post: #7
|
|||
|
|||
RE: E46 engine swap problem
Everything went well but with small problems. I tried to write soft but when i try there pop up error 2020 (ecu doesnt answer) and the gearbox entered emergency mode.
I have a second winkfp installed in the virtual machine. And everything went right there. What is the problem with NOvmware winkfp? Everything else works great on both programs. |
|||
26-04-2019, 01:50 AM,
Post: #8
|
|||
|
|||
RE: E46 engine swap problem
dde and egs vin numbers match ?
|
|||
26-04-2019, 10:55 AM,
Post: #9
|
|||
|
|||
RE: E46 engine swap problem
(25-04-2019, 13:18 PM)xssnake Wrote: Everything went well but with small problems. I tried to write soft but when i try there pop up error 2020 (ecu doesnt answer) and the gearbox entered emergency mode.WinKFP settings for ms43: Configuration - UNcheck Fast baudrate Comunication - Diagnostic protokol - K-line |
|||
26-04-2019, 14:00 PM,
Post: #10
|
|||
|
|||
RE: E46 engine swap problem
And what about setting com port, I read somewhere that it is good to change the timeout to 1000ms??
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Embedded SIM swap from TCB to ATM | mcrussell | 66 | 19,147 |
26-04-2024, 23:18 PM Last Post: Napas |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,499 |
26-04-2024, 08:06 AM Last Post: smilo |
|
6wb cluster swap and coding | xMoses | 4 | 272 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,802 |
22-04-2024, 11:44 AM Last Post: kwat |
|
BMW E60 coding problem | GarageX | 8 | 377 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 169 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 279 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 281 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 174 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
Entrynav2 Maps Problem | Chillmeister | 3 | 370 |
24-03-2024, 17:18 PM Last Post: Chillmeister |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content