Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DCM3.7 PCMFlash problems
05-05-2019, 08:47 AM,
Post: #1
|
|||
|
|||
DCM3.7 PCMFlash problems
Mate's
a few days ago i flash a VW polo 1.2 TDI DCM3.7 with pcmflash. the need EGR off. so the bought a file somewhere and ask me if i can flash it. i say no problems! first i read the car ( for backup ). i load the egr off file in pcmflash and i have massage that checksums are corrected. so i continu with write. after it was finish it gives me a massage succesfull and turn of ignition. i did it and ecu is not booting.... i dont have any id. i found somebody with fv2 and we read out the flash file. if i compare it with winols it looks like that the only area is change is checksums... bud why is the ecu not booting.... we write back original flash ( read out with pcmflash ) and ecu is booting. i told them to sort this out. also i contacted PCM support bud the have holiday. could somebody check the files for me? i upload original pcmflash obd read, mod file egr off without checksums, bdmread, |