[jaramillo]

Im not a seller, its just easy to upload via USB. No need to use internet and enet cable.
Thats why I recommend to use 18-07

[FSCmap]

It is also easy to upload it using the enet cable, and there is no need to use internet.

[hugo325]

To update the firmware of HU_NBT2, I just need to change the production date of the car for the FA file ? Then I chose the original I-level and the I-level update (18-07) ?

No need to make a V850 flash ? I just need to buy an FSC repear kit ?

[hugo325]

I tried with Esys to update the ECU "HU_NBT2" but he can not find an update for this ECU ...



So I had to go through a V850 flash ?

[hugo325]

I managed to flash my HU_NBT2 with I-level 07-18.



I find 3 carplay.ini file in "/net/hu-omap" :

/fs/sda1/opt/conn/carplay/carplay.ini
/fs/sda0/repository/istep/opt/conn/data/carplay/carplay.ini
/fs/sda0/opt/conn/data/carplay/carplay.ini

Which is the correct one ?

---

I modified the file "/fs/sda1/opt/conn/carplay/carplay.ini" (the only one in write mode access)

Resolution screen 8.8" : 1280x480

QNX : vi /net/hu-omap/fs/sda1/opt/conn/carplay/carplay.ini

i = add char
x = remove char
echap = exit mode text
:wq = save and exit

###############################################################################
[Screen]
UUID=e5f7a68d-7b0f-4305-984b-974f677a150b
Width=1280
Height=480
MaxFPS=60
PhysicalWidth=191
PhysicalHeight=78
LimitedUI=softKeyboard,softPhoneKeypad,nonMusicLists,musicLists,japanMaps
PPSServicePath=/pps/services/multimedia/renderer/control
NativeWindow=NO
WindowName=1280
VideoURL=screen:/any?winid=1280&nodstviewport=0&dstx=0&dsty=0&dstw=1280&dsth=480
###############################################################################

Unfortunately I do not have the fullscreen on the screen, what should I change more ?
The resolution of Carplay is 1280x480, however I still have the banner on the right of displayed

[hugo325]

PS: I don't have "carplay_fullscreen" in HU_NBT2 FDL

[danyro]

You can try to remount the other partitions in rw mode.
After modifying the files, dont forget to remount as ro.
Eg mount -o rw /dev...
Just keep the params from mount command.
I need to do that also on my car but did not find the time for it.
I have also a topic on this few pages back. Keep us posted

[hugo325]

It's mandatory to change all params in theses 3 files ?

/fs/sda1/opt/conn/carplay/carplay.ini
/fs/sda0/repository/istep/opt/conn/data/carplay/carplay.ini
/fs/sda0/opt/conn/data/carplay/carplay.ini

I only modified : /fs/sda1/opt/conn/carplay/carplay.ini

"remount the other partitions in rw mode", I never do this ^^

[danyro]

I dont know if in all 3 but this will be the last resort.
I will change it in all 3 and i will.share here the outcome

[hugo325]

Ok I wait your result thanks