Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MSV80.1 clone / virgin / winkfp?
21-05-2019, 23:46 PM,
(This post was last modified: 22-05-2019, 15:02 PM by mugenman1111.)
Post: #1
|
|||
|
|||
MSV80.1 clone / virgin / winkfp?
Can WinKFP clean this DME for install into new car or do i need to clone old DME somehow?
There is no BDM /JTAG /boot mode for this DME so cloning is not realistic to me... Kess v2 reads 2mb file over OBD but not sure if this is OK to write back to junkyard DME for "cloning" advise welcome! |
|||
22-05-2019, 00:05 AM,
Post: #2
|
|||
|
|||
RE: MSV80 clone / virgin / winkfp?
(21-05-2019, 23:46 PM)mugenman1111 Wrote: Can WinKFP clean this DME for install into new car or do i need to clone old DME somehow? can not do it by kess only map areas avalible..need to transfer ISN first and than flash corect zb no. to donor ecu, or clone ecu with right tools.. |
|||
Reputation: +1 - mugenman1111 [+1] | |||
22-05-2019, 01:26 AM,
Post: #3
|
|||
|
|||
RE: MSV80 clone / virgin / winkfp?
(22-05-2019, 00:05 AM)rs@chip Wrote:(21-05-2019, 23:46 PM)mugenman1111 Wrote: Can WinKFP clean this DME for install into new car or do i need to clone old DME somehow? KTAG does not show MSV80.1 as compatible model. What other tool do you suggest to read ISN from DME? Should read ISN from donor DME and transfer to CAS or read from CAS then transfer to DME curious what tool to use for this |
|||
22-05-2019, 04:04 AM,
Post: #4
|
|||
|
|||
RE: MSV80 clone / virgin / winkfp?
I think you can only change ISN in CAS. So read ISN from used DME & write to CAS
|
|||
22-05-2019, 12:55 PM,
Post: #5
|
|||
|
|||
RE: MSV80 clone / virgin / winkfp?
you can clone full ecu with ori tools ...ktag,trasdata,x17 . did many this way or you can use cheap cgdi and change isn in cas, program and code it with ista. works too.
|
|||
Reputation: +1 - mugenman1111 [+1] | |||
22-05-2019, 13:48 PM,
(This post was last modified: 22-05-2019, 14:06 PM by mugenman1111.)
Post: #6
|
|||
|
|||
RE: MSV80 clone / virgin / winkfp?
(22-05-2019, 12:55 PM)nymike Wrote: you can clone full ecu with ori tools ...ktag,trasdata,x17 . did many this way or you can use cheap cgdi and change isn in cas, program and code it with ista. works too. what version KTAG support msv80.1? I have ktag & kess master also have istad/p setup in older BMW you can just virgin the DME and resync EWS to DME in this case I have to write ISN from DME to CAS OR proper clone the MSV80.1 (would prefer this) if i can proper clone with Ktag do i just choose msv70 and go with that BDM pin out? or can you tell me if i can just sync CAS > DME with ISTA and it won't bitch |
|||
22-05-2019, 21:39 PM,
Post: #7
|
|||
|
|||
RE: MSV80.1 clone / virgin / winkfp?
ktag clone will not read msv80 (its different ecu than msv70 ). And you cant just sync dme-cas with ista because it will not work. To properly clone it you need ori ktag,trasdata etc . Full read bdm with isn number.
find someone local to you who has vvdi2, cgdi, bmw explorer, autohex, ori avdi. Those tools can match it by obd. |
|||
Reputation: +1 - mugenman1111 [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Edc17c54 Crafter Clone | Makson4eg | 2 | 13 |
3 hours ago Last Post: Makson4eg |
|
Peugeot 207 - MEV17.4 - VIRGIN | KMH | 1 | 37 |
06-05-2024, 18:59 PM Last Post: davinci_86 |
|
Clone MD1CS003 it does not work | Diagautoecu | 0 | 58 |
05-05-2024, 13:42 PM Last Post: Diagautoecu |
|
audi a3 pcr 2.1 clone | bboctavian | 5 | 119 |
02-05-2024, 14:12 PM Last Post: ROD-BENDERS |
|
clone EDC17CP54 | Prince.bibers | 12 | 307 |
01-05-2024, 19:58 PM Last Post: Prince.bibers |
|
EDC16C34 virgin eeprom | NTec | 3 | 78 |
01-05-2024, 08:19 AM Last Post: NTec |
|
Nissan Delphi DCM 3.4 virgin | moddder | 2 | 67 |
30-04-2024, 09:27 AM Last Post: snake13 |
|
virgin BSI peugeot 407 | pistolo30 | 3 | 89 |
28-04-2024, 17:41 PM Last Post: rhj |
|
PCR2.1 clone | MirzaF20 | 1 | 85 |
25-04-2024, 17:45 PM Last Post: jokir |
|
BSI virgin need | konradzd | 1 | 68 |
23-04-2024, 16:49 PM Last Post: epasha |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content