Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED
20-09-2016, 13:12 PM,
Post: #133
RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED
(20-09-2016, 12:34 PM)Simple Wrote:  You could also mention how much RAM (if you bought the computer with 32 bit, then it is likely to be 4GB) and Disk space you have.
But it is most likely the Disk and I would not advise you to change the type, since you are not familiar with BIOS/UEFI.

However, while I am not familiar with your laptop, if you wish to change the controller type:
1- Create a small partition (10 mb) on the Disk Drive of the type wanted, and/or change it through Disk Management.
2- Format it and let the computer recognise it (this is for Windows to download the appropriate drivers).
3- Now you can change the Disk controller type (in BIOS) and reboot from you original Disk.
4- Remove the small partition you created.

If you don't do the above steps, you won't be able to boot. There are other steps between the above ones, but they are the main points.

Having said that, I would install Windows 10 64 bit, then install VirtualBox (fast and free) or VMWare player (free and good compatibility) and you will have a lot of advantages using 32 bit Windows XP as it requires few resources.

Hi,

I's just a basic machine, having just 2 Gb of RAM. I'll try that one, what you suggested, but the reason why I could not find the information about the BIOS, becuase of it's version. There is no information about the disk controller. :/
I'll post picture as well, but now I'm currently doing a system restore to have an absolute clean system. smile

(20-09-2016, 13:12 PM)thomeee Wrote:  
(20-09-2016, 12:34 PM)Simple Wrote:  You could also mention how much RAM (if you bought the computer with 32 bit, then it is likely to be 4GB) and Disk space you have.
But it is most likely the Disk and I would not advise you to change the type, since you are not familiar with BIOS/UEFI.

However, while I am not familiar with your laptop, if you wish to change the controller type:
1- Create a small partition (10 mb) on the Disk Drive of the type wanted, and/or change it through Disk Management.
2- Format it and let the computer recognise it (this is for Windows to download the appropriate drivers).
3- Now you can change the Disk controller type (in BIOS) and reboot from you original Disk.
4- Remove the small partition you created.

If you don't do the above steps, you won't be able to boot. There are other steps between the above ones, but they are the main points.

Having said that, I would install Windows 10 64 bit, then install VirtualBox (fast and free) or VMWare player (free and good compatibility) and you will have a lot of advantages using 32 bit Windows XP as it requires few resources.

Hi,

I's just a basic machine, having just 2 Gb of RAM. I'll try that one, what you suggested, but the reason why I could not find the information about the BIOS, becuase of it's version. There is no information about the disk controller. :/
I'll post picture as well, but now I'm currently doing a system restore to have an absolute clean system. smile

I did what you recommended, but still no possiblity in BIOS to change the disk controller. I have never seen this type of bios before (let see the attached pic.) Do you?


Attached Files Thumbnail(s)
   
Quote this message in a reply


Messages In This Thread
RE: DiagBox Version 7.46 - by scarymistake - 05-07-2014, 07:58 AM
RE: DiagBox Version 7.53 (by scary) - by Rafiusk - 25-09-2014, 11:56 AM
RE: DiagBox Version 7.47 - by scarymistake - 05-07-2014, 11:39 AM
RE: DiagBox Version 7.49 (by scary) - by salar123 - 14-07-2014, 12:30 PM
RE: DiagBox Version 7.49 (by scary) - by altin106 - 14-07-2014, 19:35 PM
RE: DiagBox Version 7.49 (by scary) - by obdstart - 14-07-2014, 21:09 PM
RE: DiagBox Version 7.49 (by scary) - by wg969 - 16-07-2014, 22:30 PM
RE: DiagBox Version 7.49 (by scary) - by Knightey- - 06-09-2014, 22:47 PM
RE: DiagBox Version 7.49 (by scary) - by croydon - 11-09-2014, 15:50 PM
RE: DiagBox Version 7.52 (by scary) - by OldDog - 22-09-2014, 22:29 PM
RE: DiagBox Version 7.54 (by scary) - by croydon - 05-10-2014, 09:07 AM
RE: DiagBox Version 7.54 (by scary) - by Rafiusk - 04-10-2014, 23:12 PM
RE: DiagBox Version 7.54 (by scary) - by coriducu - 05-10-2014, 14:44 PM
RE: DiagBox Version 7.54 (by scary) - by Rafiusk - 05-10-2014, 19:56 PM
RE: DiagBox Version 7.54 (by scary) - by PowerLee - 06-10-2014, 16:25 PM
RE: DiagBox Version 7.54 (by scary) - by Knightey- - 07-10-2014, 16:23 PM
RE: DiagBox Version 7.54 (by scary) - by ronin - 15-05-2015, 06:00 AM
RE: DiagBox Version 7.54 (by scary) - by tontito - 15-05-2015, 17:35 PM
RE: DiagBox Version 7.54 (by scary) - by croydon - 16-05-2015, 10:17 AM
RE: DiagBox Version 7.54 (by scary) - by Fabyo - 17-05-2015, 10:43 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 17-05-2015, 13:59 PM
RE: DiagBox Version 7.54 (by scary) - by croydon - 26-05-2015, 04:55 AM
RE: DiagBox Version 7.54 (by scary) - by mladen76 - 26-05-2015, 06:54 AM
RE: DiagBox Version 7.54 (by scary) - by Batru - 26-05-2015, 09:33 AM
RE: DiagBox Version 7.54 (by scary) - by 12runner - 29-05-2015, 12:02 PM
RE: DiagBox Version 7.54 (by scary) - by croydon - 31-05-2015, 07:15 AM
RE: DiagBox Version 7.54 (by scary) - by djinz - 30-05-2015, 00:56 AM
RE: DiagBox Version 7.54 (by scary) - by coriducu - 30-05-2015, 03:04 AM
RE: DiagBox Version 7.54 (by scary) - by pug21 - 05-06-2015, 22:56 PM
RE: DiagBox Version 7.54 (by scary) - by coriducu - 06-06-2015, 04:09 AM
RE: DiagBox Version 7.54 (by scary) - by vagvag - 06-06-2015, 04:33 AM
RE: DiagBox Version 7.54 (by scary) - by scoutman - 09-06-2015, 11:32 AM
RE: DiagBox Version 7.54 (by scary) - by uh60 - 11-06-2015, 14:53 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 11-06-2015, 15:09 PM
RE: DiagBox Version 7.54 (by scary) - by mladen76 - 11-06-2015, 15:32 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 11-06-2015, 16:51 PM
RE: DiagBox Version 7.54 (by scary) - by mladen76 - 11-06-2015, 19:49 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 11-06-2015, 23:59 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 15-06-2015, 20:23 PM
RE: DiagBox Version 7.54 (by scary) - by olgrano - 15-06-2015, 15:04 PM
RE: DiagBox Version 7.54 (by scary) - by mladen76 - 15-06-2015, 16:03 PM
RE: DiagBox Version 7.54 (by scary) - by olgrano - 15-06-2015, 16:06 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 15-06-2015, 16:43 PM
RE: DiagBox Version 7.54 (by scary) - by olgrano - 15-06-2015, 17:04 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 15-06-2015, 19:22 PM
RE: DiagBox Version 7.54 (by scary) - by olgrano - 15-06-2015, 20:22 PM
RE: DiagBox Version 7.54 (by scary) - by olgrano - 16-06-2015, 07:31 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 16-06-2015, 08:39 AM
RE: DiagBox Version 7.54 (by scary) - by frank194 - 19-10-2015, 13:19 PM
RE: DiagBox Version 7.54 (by scary) - by alvarezegam - 27-06-2015, 19:55 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 28-06-2015, 22:20 PM
RE: DiagBox Version 7.54 (by scary) - by autombr - 15-07-2015, 12:43 PM
RE: DiagBox Version 7.54 (by scary) - by Geri - 06-08-2015, 06:42 AM
RE: DiagBox Version 7.54 (by scary) - by calimax - 05-08-2015, 23:46 PM
RE: DiagBox Version 7.54 (by scary) - by napel - 07-09-2015, 14:17 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 07-09-2015, 20:22 PM
RE: DiagBox Version 7.54 (by scary) - by iustin73 - 17-10-2015, 03:25 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 19-10-2015, 21:31 PM
RE: DiagBox Version 7.54 (by scary) - by josep3 - 20-10-2015, 16:03 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 20-10-2015, 20:55 PM
RE: DiagBox Version 7.54 (by scary) - by rogerbsp - 24-10-2015, 23:19 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 25-10-2015, 10:44 AM
RE: DiagBox Version 7.54 (by scary) - by mishja - 25-10-2015, 11:21 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 25-10-2015, 11:57 AM
RE: DiagBox Version 7.54 (by scary) - by coba76 - 12-12-2015, 19:03 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 13-12-2015, 15:42 PM
RE: DiagBox Version 7.54 (by scary) - by Timm - 14-12-2015, 01:45 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 14-12-2015, 08:15 AM
RE: DiagBox Version 7.54 (by scary) - by Timm - 15-12-2015, 02:24 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 15-12-2015, 06:45 AM
RE: DiagBox Version 7.54 (by scary) - by Timm - 15-12-2015, 10:52 AM
RE: DiagBox Version 7.54 (by scary) - by Simple - 15-12-2015, 12:29 PM
RE: DiagBox Version 7.54 (by scary) - by Timm - 16-12-2015, 14:11 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 16-12-2015, 17:51 PM
RE: DiagBox Version 7.54 (by scary) - by manocao - 24-12-2015, 12:07 PM
RE: DiagBox Version 7.54 (by scary) - by galaxia - 09-02-2016, 16:25 PM
RE: DiagBox Version 7.54 (by scary) - by manocao - 09-02-2016, 18:28 PM
RE: DiagBox Version 7.54 (by scary) - by galaxia - 10-02-2016, 02:22 AM
RE: DiagBox Version 7.54 (by scary) - by manocao - 10-02-2016, 06:32 AM
RE: DiagBox Version 7.54 (by scary) - by galaxia - 10-02-2016, 09:26 AM
RE: DiagBox Version 7.54 (by scary) - by mishja - 10-04-2016, 20:01 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 11-04-2016, 17:47 PM
RE: DiagBox Version 7.54 (by scary) - by Simple - 11-04-2016, 21:25 PM
RE: Update PSA DiagBox WITHOUT Internet! V7.65 Allready PATCHED - by thomeee - 20-09-2016, 13:12 PM
Solved - by Matrixer - 21-11-2016, 19:04 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  diagbox 9.173 sharawi 2 184 21-04-2024, 14:31 PM
Last Post: justdiag
  PSA Diagbox VCI Interfaces alexturbo 18 6,864 27-12-2023, 21:45 PM
Last Post: apol
PPeugeot DIAGBOX 2021 9.85 FULL INSTALATION akli 6 2,768 26-12-2023, 20:21 PM
Last Post: Le-Mans
PCitroen DIAGBOX online walczaklu 10 8,715 03-12-2023, 12:57 PM
Last Post: mattydr67
  DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) Simple 33 35,704 22-11-2023, 06:16 AM
Last Post: Jeppo
PPeugeot Diagbox 9.129 activation request dadoa4 4 2,454 09-11-2023, 09:59 AM
Last Post: bovhec
  diagbox 9.150 stasi 5 2,288 16-09-2023, 19:41 PM
Last Post: stasi
  DiagBox Language Change Simple 16 17,477 14-09-2023, 10:01 AM
Last Post: żarówka
  2011 Peugeot 207 1.4 hdi ECU update for P1490 fix jamesworts 5 460 13-09-2023, 21:06 PM
Last Post: jamesworts
  DIAGBOX help needed installing mars2moon 4 1,056 23-07-2023, 18:45 PM
Last Post: J415UNNY

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content