Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Needing remote coding
15-06-2019, 19:49 PM,
Post: #1
|
|||
|
|||
Needing remote coding
I installed a CIC idrive remote on my NBT EVO retrofit. I just need some simple coding to make the new iDrive remote work.
Myles |
|||
15-06-2019, 20:00 PM,
Post: #2
|
|||
|
|||
RE: Needing remote coding
what do u mean by remote ? , you mean controller ??? its not coding issue and no one will be able to help you remotely . give more details which car is it ,, how did u do EVO retrofit .
|
|||
15-06-2019, 20:17 PM,
Post: #3
|
|||
|
|||
RE: Needing remote coding
(15-06-2019, 20:00 PM)emhtuning Wrote: what do u mean by remote ? , you mean controller ??? its not coding issue and no one will be able to help you remotely . give more details which car is it ,, how did u do EVO retrofit . Bimmer Retrofit did the NBT EVO retrofiting and coding. I installed everything. I purchased a brand new iDrive controller (pic attached). The new iDrive controller isn't working with my setup. I'm assuming I need coding, correct? The car is a 2008 bmw 135i. |
|||
15-06-2019, 21:22 PM,
Post: #4
|
|||
|
|||
RE: Needing remote coding
(15-06-2019, 20:17 PM)Inline683TT Wrote:(15-06-2019, 20:00 PM)emhtuning Wrote: what do u mean by remote ? , you mean controller ??? its not coding issue and no one will be able to help you remotely . give more details which car is it ,, how did u do EVO retrofit . bimmer retrofit Enet adapter is designed to work with NBT touch controller , in your case you have installed an old CIC controller, CIC controller works on CAN1 bus system while NBT works on CAN2 bus system , you need to make a direct connection of PIN 3 ( CAN1 HIGH ) and PIN4 ( CAN1 LOW ) to the car original Quadlock socket ( before bimmerretorift adapter socket ) ,, quadlock Pin 9 = CAN1 Low , PIN 11= CAN1 HIGH I also don't understand why don't you contact bimmer retrofit and ask for advice or help , they always claim that they have best service after sale , lets see how ture is that . |
|||
16-06-2019, 01:23 AM,
Post: #5
|
|||
|
|||
RE: Needing remote coding
(15-06-2019, 21:22 PM)emhtuning Wrote:(15-06-2019, 20:17 PM)Inline683TT Wrote:(15-06-2019, 20:00 PM)emhtuning Wrote: what do u mean by remote ? , you mean controller ??? its not coding issue and no one will be able to help you remotely . give more details which car is it ,, how did u do EVO retrofit . you need to make a direct connection of PIN 3 ( CAN1 HIGH ) and PIN4 ( CAN1 LOW ) to the car original Quadlock socket ( before bimmerretorift adapter socket ) ,, quadlock Pin 9 = CAN1 Low , PIN 11= CAN1 HIGH This pin, is this a pin connected to a wire? Is this wire something I must order from dealership? Thank you for your above and beyond help. I also don't understand why don't you contact bimmer retrofit and ask for advice or help , they always claim that they have best service after sale , lets see how ture is that . It's been quite a hell of a ride with these people at Bimmer Retrofit. All they want is $$$$$$$ and they refuse to help me, they reply stating that I need installer. I dont have an installer in South Florida that'll help me with this. I've asked all stereo installers and they say no or dont bother replying to my emails. I haven't been able to connect my phone to my car yet for Car PLay or Bluetooth since day 1. I get the following error Can't connect to vehicle when I attempt. I bought the radio from a 3rd party seller on ebay, from there I sent Bimmer Retrofit everything for coding and bench testing. They shipped everything back with their emulator and all necessary hardware coded too. They refuse to help me, because I didnt buy the radio from them. |
|||
16-06-2019, 07:06 AM,
Post: #6
|
|||
|
|||
RE: Needing remote coding
The dealer will not even understand what your problem is , nothing to do with the dealer .
if you have some basic soldering skills and some electrical basic tools like carpet knife and electrical tape then I can help you .. send me a PM also if you want to fix your bluetooth . |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Coding a F80 M3 race car | PeterY | 10 | 442 |
9 hours ago Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 587 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 221 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 216 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 115 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,009 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 448 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
|
TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 1,929 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
BMW F10 RHD to LHD coding? | morto | 12 | 1,489 |
13-04-2024, 17:32 PM Last Post: pablito94 |
|
E60 EVO OABR to OBD Coding | painsage | 13 | 532 |
12-04-2024, 10:54 AM Last Post: painsage |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content