[Kinder]

what for fdl, i changed FA, and 6WA, not 6WB, it have connection between kombi and nbt, optical

[mislavto]

Hi again with update. Stromag was right, I checked mileage with abrites and kombi still has old mileage. However, VIN is also not updated, and I cannot update it.
I also cannot caculate SVT SOLL for dkombi, it stays blue always, no matter which zeitkriterium or factory istep is set. Why is that?
Also, abrites does not see dkombi in a programming list

[willy26]

Hi again with update. Stromag was right, I checked mileage with abrites and kombi still has old mileage. However, VIN is also not updated, and I cannot update it.
I also cannot caculate SVT SOLL for dkombi, it stays blue always, no matter which zeitkriterium or factory istep is set. Why is that?
Also, abrites does not see dkombi in a programming list

hi
vin in 95320 is not erased!

[Stromag]

If all VINs are deleted you will get new coded.

 Otherwise, you can also delete the VIN directly write the new VIN.

 If you have forgotten to delete it, do not enter it like new.

---

Hi again with update. Stromag was right, I checked mileage with abrites and kombi still has old mileage. However, VIN is also not updated, and I cannot update it.
I also cannot caculate SVT SOLL for dkombi, it stays blue always, no matter which zeitkriterium or factory istep is set. Why is that?
Also, abrites does not see dkombi in a programming list

hi
vin in 95320 is not erased!

It also does not have to be deleted VIN in 95320.  I do not know anybody who does that.

 Because if you use an emulator, you do not delete anything in the 95320

[darthur90]

Just put car vin into 6wb eeproms and than try to code, vvdi or r270 will do that for you

[mislavto]

Once I read 95320 eeprom, after I change VIN do I have to checksum the file? Yesterday I read 95320 eeprom from old f10 instrument cluster and I see two short VINs.