[m3nt4l]

Hello,

I have a BMW E93 ( VIN: PL66229) and I have installed the LCI climate control panel into it with the “ALL” function and integrated heated seats buttons.

All functions work apart from when the air conditioning button ( snowflake button) is pressed. The air conditioning pump doesn’t kick in and there’s no air con.

Does this require some sort of coding?

The vehicle has also previously hadn’t the pro idrive retrofitted if this makes any difference.

Thanks

[Matthew53]

Read your actual IHKA and and then write to the LCI by NCSExpert. It shouldn't be the problem to get it work, because accordingly to realoem, IHKA from LCI is interchangeable with preLCI

[2013m5]

You need to program/coding.

[m3nt4l]

Would just VO coding IHKA do the job? 

Thanks

[Fx82]

Yes it will after that the a/c will work.

[m3nt4l]

Just to confirm I managed to get the A/C working again.

All I did was recode via NCS Expert the IHK module using SG Codieren. When I did this the “All” function did not work.

I then went into the TRC file and changed the “REST” function to nicht Aktiv and then the “ALL” function is now working correctly.

Thank you to everyone who helped and hopefully this will help someone else!!