Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW X5xdrive40e
09-09-2019, 08:56 AM,
Post: #1
|
|||
|
|||
BMW X5xdrive40e
Hi guys,
I had to swap a faulty SME in an X5 xdrive40e. Did the programming, and transferred battery values from the old SME. However, now i need a 12 digit code from the EOS tester to be able to 'activate' the HV contacts of the SME. This could should be stored in the old SME. Anybody know if i can read this with TOOL32 ? Thanks, Bjorn |
|||
09-09-2019, 16:11 PM,
Post: #2
|
|||
|
|||
RE: BMW X5xdrive40e
Eos test generates the code after a succesfull test... So think you need to do that.. And then put in code through Ista/d...
|
|||
09-09-2019, 17:07 PM,
Post: #3
|
|||
|
|||
RE: BMW X5xdrive40e
Yes exactly EOS test/ code is needed after battery pack was opened.
|
|||
10-09-2019, 19:52 PM,
Post: #4
|
|||
|
|||
RE: BMW X5xdrive40e
Thanks for the feedback guys.
Since i don't own a EOS tester, i'm gonna head off to the dealer. Thanks, |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content