Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM A2 lan problem
|
03-07-2019, 20:01 PM,
(This post was last modified: 24-07-2019, 07:19 AM by BobbySD.)
Post: #1
|
|||
|
|||
|
ICOM A2 lan problem
Hello,
Im trying to repair one of my A2 interfaces. It acts like theres no power. No led blinks or anything. I controled all the solderings and routes. After +12V input pin there is a diode and a coil. When I put +12 after the coil leds starts blinking so Im suspecting one of those two is damaged. I would like to change it but there is no info on the parts. Does anybody have any info about D1 and L2 coil? Also interesting that L3 is empty... Thank you |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
03-07-2019, 21:59 PM,
Post: #2
|
|||
|
|||
|
RE: ICOM A2 scheme or info
D1 1N4001-1N4007 not critical element
L2 Littelfuse Pico Fuse 3A (check if it burned out) |
|||
|
|
|
04-07-2019, 11:09 AM,
Post: #3
|
|||
|
|||
|
RE: ICOM A2 scheme or info
Woho its a fuse? :O that might be the problem. I can changebit for this one https://www.gme.cz/pojistka-axialni-lans...3-15a-125v
|
|||
|
|
|
24-07-2019, 07:22 AM,
Post: #4
|
|||
|
|||
|
RE: ICOM A2 lan problem
Fuse changed and icom starts working. Anyway I have another issue, system led starts blinking and when I connect lan cable also lan led starts blinking. But interface was not found in itool radar. So I disconnected lan and connected back and lan led now stays off. No matter what Ive tried only system led is blinking. Its strange because before the fuse blown up it worked all good and now I just changed the fuse
 Any suggestions what could be wrong? Thanks |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 107 | 36,286 |
Yesterday, 16:33 PM Last Post: hashtagmaster |
|
| Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,447 |
26-04-2024, 08:06 AM Last Post: smilo |
|
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,764 |
22-04-2024, 11:44 AM Last Post: kwat |
|
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 43,457 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 337 |
12-04-2024, 18:55 PM Last Post: Node |
| BMW E60 coding problem | GarageX | 8 | 361 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
| Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,499 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
| CCC flash WINKFP ICOM | BimmerSLO | 9 | 380 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
|
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 166 |
28-03-2024, 18:47 PM Last Post: Unspec |
| ISTA launcher problem | Red_bean_bun | 1 | 275 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content
