[sqorpius]

Hi All,

Quick question with following scenario:

I have purchased an IHKA from F32 2014 USA model (Fahrenheit, FM/AM button, instead of TP)

I want to fit this in a F36 ECE from 2014 (Celcius). Will simply VO-coding the IHKA in ECE car convert the Fahrenheit digits on IHKA to Celcius? Or is this hard coded in SWFL of IHKA.

Thanks in advance!

P.s: below picture is not the IHKA i have, but the one I probably should have purchased

[inspi1981]

This is not IHKA, but only control panel. IHKA is under dashboard

[sqorpius]

This is not IHKA, but only control panel. IHKA is under dashboard

Thank you, so when replacing this front panel, which module do i need to VO code to work?

[inspi1981]

No coding needed when changing for same type. No idea about Your case

[larrylam646]

This is not IHKA, but only control panel. IHKA is under dashboard

Thank you, so when replacing this front panel, which module do i need to VO code to work?

Not quite sure what you are doing but the part # of the Automatic HVAC Control panel is the same for F36/F32 and ECE/NA. Just check the part#s on the back of the Auto HVAC Controllers.

You should be able to configure temp to C from the iDrive if you are just swapping in an F32 non-LCI front panel with the same features e.g. heated seats. FYI, for the radio/memory/CD Controller, you should be able reuse your ECE Controller with the F32 Auto HVAC Controller.

If you are upgrading to the LCI front panel, depending on your vehicle manufacturing date, you may need to also upgrade your IHKA to IHKA3 and you will have to VO/FDL Code the IHKA3 module.


Larry