[bmw335d]

Hi,

I'm trying to flash my G01 NBT_EVO to the latest firmware.  I have iStep from 2018 and the latest pszdata 4.18.32 has updated files for my nbt.

I'm using latest esys 3.33.4

I have a 70 amp charger and i followed the flashing guide but now i have a blue screen on idrive and it is stuck saying flashing time 00:00:00,

Here is the log from the tal execution from esys when i ran the execution to the HU_NBT2 only.

I also disabled vcm / msm update.

Can anyone help me

===================

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2019/08/02-14:18:49.760
[] prepareTALExecution started [PROGRESS]
[] RoE deactivation during PrepareTALExecutionTask failed for the following ECUs: [ECUId:FRR2_0x21, ECUId:KAFAS4_0x5D] [WARN]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[] prepareVehicleForFlash finished [PROGRESS]
[HU_NBT2 - 63] prepareECUforBLUpdate started [PROGRESS]
[HU_NBT2 - 63] prepareECUforBLUpdate finished [PROGRESS]
[HU_NBT2 - 63] authenticateECUforBLUpdate started [PROGRESS]
[HU_NBT2 - 63] authenticateECUforBLUpdate finished [PROGRESS]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: TA started [TRANSACTION]
[HU_NBT2 - 63] performECUBLUpdate started with protocol UDS [PROGRESS]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: 0% progress on ECUId:HU_NBT2_0x63 [0% of btld_00001ffd-006_074_002] [TRANSACTION]
btld_00001ffd-006_074_002] [TRANSACTION]
MCDDiagService<id=59200, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_CM_ICV - RoutineControl CheckMemory IndicatedCheckValue, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-006_074_002] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [THROWABLE]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

[HU_NBT2 - 63] prepareECUforBLUpdate started [PROGRESS]
[HU_NBT2 - 63] prepareECUforBLUpdate finished [PROGRESS]
[HU_NBT2 - 63] authenticateECUforBLUpdate started [PROGRESS]
[HU_NBT2 - 63] authenticateECUforBLUpdate finished [PROGRESS]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: TA started [TRANSACTION]
[HU_NBT2 - 63] performECUBLUpdate started with protocol UDS [PROGRESS]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [2% of btld_00001ffd-006_074_002] [TRANSACTION]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-006_074_002] [TRANSACTION]
MCDDiagService<id=276618, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RDBI_RMA - ReadDataByIdentifier ReadMemoryAddress, description=error: negative response : subFunctionNotSupported, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=59200, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_CM_ICV - RoutineControl CheckMemory IndicatedCheckValue, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-006_074_002] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [THROWABLE]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash;  Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

[HU_NBT2 - 63] installECUBL started [PROGRESS]
[HU_NBT2 - 63] installECUBL finished [PROGRESS]
[HU_NBT2 - 63] finalizeECUBLUpdate started [PROGRESS]
[HU_NBT2 - 63] finalizeECUBLUpdate finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "14min 58s". [C206]

[bmw335d]

Any help from anyone, after examing the logs these seem to be the critical errors, any ideas how to resolve?

MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[] prepareVehicleForFlash finished [PROGRESS]

MCDDiagService<id=59200, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_CM_ICV - RoutineControl CheckMemory IndicatedCheckValue, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - btld_00001ffd-006_074_002] Transaction type: blFlash; Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-006_074_002] [TRANSACTION]
[] job failed with negative response error:
code: repeat job
description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR
[THROWABLE]

[Matthew53]

Try with DHCP server (This is for ICOM)

ICOM configuration for dhcp server software (www.dhcpserver.de/cms) or router (May not work with I series Intel processors – require external DHCP server e.g. hardware router)

ICOM Config

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

DHCPSRV.INI

[SETTINGS]
IPPOOL_1=192.168.68.1-254
IPBIND_1=192.168.68.99
AssociateBindsToPools=1
Trace=1
DeleteOnRelease=0
ExpiredLeaseTimeout=3600

[GENERAL]
LEASETIME=86400
NODETYPE=8
SUBNETMASK=255.255.255.0
NEXTSERVER=192.168.68.99
ROUTER_0=192.168.68.1

[DNS-SETTINGS]
EnableDNS=0

[TFTP-SETTINGS]
EnableTFTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
WritePermission=0

[HTTP-SETTINGS]
EnableHTTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
[00-01-A9-00-EE-E9]
IPADDR=192.168.68.1
AutoConfig=06/26/2016 12:41:32
Hostname=ICOM1120134
LeaseEnd=1467070189


Windows Ethernet config:

"Use the following IP Address"
IP 192.168.68.99
Subnet mask 255.255.255.0

[bmw335d]

Try with DHCP server (This is for ICOM)

ICOM configuration for dhcp server software  (www.dhcpserver.de/cms) or router  (May not work with I series Intel processors – require external DHCP server e.g. hardware router)

ICOM Config

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

DHCPSRV.INI

[SETTINGS]
IPPOOL_1=192.168.68.1-254
IPBIND_1=192.168.68.99
AssociateBindsToPools=1
Trace=1
DeleteOnRelease=0
ExpiredLeaseTimeout=3600

[GENERAL]
LEASETIME=86400
NODETYPE=8
SUBNETMASK=255.255.255.0
NEXTSERVER=192.168.68.99
ROUTER_0=192.168.68.1

[DNS-SETTINGS]
EnableDNS=0

[TFTP-SETTINGS]
EnableTFTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
WritePermission=0

[HTTP-SETTINGS]
EnableHTTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
[00-01-A9-00-EE-E9]
IPADDR=192.168.68.1
AutoConfig=06/26/2016 12:41:32
Hostname=ICOM1120134
LeaseEnd=1467070189


Windows Ethernet config:

"Use the following IP Address"
IP 192.168.68.99
Subnet mask 255.255.255.0

no icom, enet only

[xDrive]

If your EVO produced between 01/11/2018 and 01/05/2019, then pay attention to the note from ISTA release notes:

4.3 * NEW * HU-H2 - Note about repair measure
Fault description:
When programming a vehicle with HU-H2 NBTEvo, a note is displayed about a HU-H2 programming failure.
Model series affected:
Vehicles F0x, F1x, F2x, F3x, F4x, F5x, F6x, F8x, F90, G0x, G1x, G3x, I01, I1x, RRx with HU-H2.
Measure / Workaround:
1) Follow the note and carry out the repair measure (service function) for the HU-H2. This can take up to 20 minutes.
2) Calculate and execute measures plan.
Pay attention to final work.
Fault corrected by:
HU-H2s from a limited production period are affected by the fault. Please observe PuMA measure 64862978.
Affected application:
ISTA 4

[bmw335d]

If your EVO produced between 01/11/2018 and 01/05/2019, then pay attention to the note from ISTA release notes:

4.3 * NEW * HU-H2 - Note about repair measure
Fault description:
When programming a vehicle with HU-H2 NBTEvo, a note is displayed about a HU-H2 programming failure.
Model series affected:
Vehicles F0x, F1x, F2x, F3x, F4x, F5x, F6x, F8x, F90, G0x, G1x, G3x, I01, I1x, RRx with HU-H2.
Measure / Workaround:
1) Follow the note and carry out the repair measure (service function) for the HU-H2. This can take up to 20 minutes.
2) Calculate and execute measures plan.
Pay attention to final work.
Fault corrected by:
HU-H2s from a limited production period are affected by the fault. Please observe PuMA measure 64862978.
Affected application:
ISTA 4

anyway to fix without icom? right now unit is stuck in programming mode

[bmw335d]

anyone got any other ideas ?

[MOCKING_BIRD]

anyone got any other ideas ?

Use esys and flash it

[bmw335d]

anyone got any other ideas ?

Use esys and flash it

Tried several times, keeps failing as per log in original post

[jaramillo]

Have you tried with different data?