[Ibrahim24]

I'll help you, send me a PM please.

[HU_man]

You did just the 50% of the process, need to upload the fsc to the head unit using esys

I may not have fully understood how it works. What is the role of the bin file generated by HUTool on the USB stick? I thought the bin file would automatically transfer the fsc to the central unit and automatically activate carplay in a single step ??


I'm sorry for my ignorance I'm a beginner and I'm trying to understand how it works

With HU2.6 the bin file only clear old FSC in your HU. Thats why your navigation become grey/not active.
You must import FSC manually by Esys.
Drop me a PM if you need help.

HUTool 2.6 working very well, except it cant automatically install FSC by USB

[sicess]

For the map FSC file, you can load it with USB stick too.

1. prepare a clean FAT32 formatted USB stick
2. create "FSC" folder in the USB stick, and then put the map FSC file inside the folder
3. create a empty file "config.nfm" in the USB stick

plug this USB stick to the car.

Yeah, but it only installs the 120 FSC for the maps, not the actual A9 or A0 FSC for navigation activation itself, so it will always keep on "loading"

[DayvG]

For the map FSC file, you can load it with USB stick too.

1. prepare a clean FAT32 formatted USB stick
2. create "FSC" folder in the USB stick, and then put the map FSC file inside the folder
3. create a empty file "config.nfm" in the USB stick

plug this USB stick to the car.

Yeah, but it only installs the 120 FSC for the maps, not the actual A9 or A0 FSC for navigation activation itself, so it will always keep on "loading"

Is the solution for this to load the FSC A9/A0 manually with E-Sys?

[bmwcoder75]

For the map FSC file, you can load it with USB stick too.

1. prepare a clean FAT32 formatted USB stick
2. create "FSC" folder in the USB stick, and then put the map FSC file inside the folder
3. create a empty file "config.nfm" in the USB stick

plug this USB stick to the car.

Yeah, but it only installs the 120 FSC for the maps, not the actual A9 or A0 FSC for navigation activation itself, so it will always keep on "loading"

Is the solution for this to load the FSC A9/A0 manually with E-Sys?

Yes of course it is. And all other fsc files too.
Same process as oem fsc

[codemybmw]

Extract to root of USB. 
This will auto install all FSC for you including EU map FSC and carplay
Enjoy. 

Let me know how it goes. 

Hello everyone,
I had plans to activate carplay on my vehicle (BMW Serie 4, NBTEVO_J, Road Map Europe 2019-2). I coded with BimmerCode the following options:

M_LAPTIMER => aktiv
CARPLAY_SWT => aktiv
APPLE_ENHANCEMENTS-> aktiv
AUX1_IN_HU => wert_21
CID_DISP_AR => ratio_1_07
A4A_SWT => aktiv
A4A_XL => nicht_aktiv
A4A_KML => nicht_aktiv

Then I used HUTool 2.6 to generate the FULL FSC SWT SET with my VIN (G853705). I copied the generated .bin to a USB stick and followed the procedure for the patch to be applied (wait 30s, remove the key, reboot, then wait for automatic reboot). Unfortunately, CARPLAY is not activated and my navigation no longer works (message "loading" all the time). When I try to reinstall my GPS map, a message tells me that you need an activation code associated with the map ....

Can someone help me and tell me what I did wrong?

thank you in advance

winphoenix

[scorpium59]

Guys,

fsc map EU 1200050, 1200064, 1200099, 1200128.

what impact of use exactly on the difference of the last 2 digits?

[bmwcoder75]

Do not mix BIN solutions. This is the best way to mess up your unit. And even a flash won't recover it. You used hu 2.6, stick to it and load the fsc files when you get your Enet cable.

[winphoenix88]

Extract to root of USB. 
This will auto install all FSC for you including EU map FSC and carplay
Enjoy. 

Let me know how it goes. 

Hello everyone,
I had plans to activate carplay on my vehicle (BMW Serie 4, NBTEVO_J, Road Map Europe 2019-2). I coded with BimmerCode the following options:

M_LAPTIMER => aktiv
CARPLAY_SWT => aktiv
APPLE_ENHANCEMENTS-> aktiv
AUX1_IN_HU => wert_21
CID_DISP_AR => ratio_1_07
A4A_SWT => aktiv
A4A_XL => nicht_aktiv
A4A_KML => nicht_aktiv

Then I used HUTool 2.6 to generate the FULL FSC SWT SET with my VIN (G853705). I copied the generated .bin to a USB stick and followed the procedure for the patch to be applied (wait 30s, remove the key, reboot, then wait for automatic reboot). Unfortunately, CARPLAY is not activated and my navigation no longer works (message "loading" all the time). When I try to reinstall my GPS map, a message tells me that you need an activation code associated with the map ....

Can someone help me and tell me what I did wrong?

thank you in advance

winphoenix

Wow, thank you very much, it works like a charm very easyly !! My navigation works again and carplay is activated !!! it's wondefull. The power of official HuTool 3.9 official I suppose ... Thank you again !! next step carplay in full screen but I think it's necessary to update my i-step HU because it's too old.

[codemybmw]

Glad it all worked out. Enjoy.