[raffy haddad]

The ecu have not been touched by anyone
I dig it to find eeprom
The prpblem i was trying to obtain pin code from bsi but its nec mcu and can't read it
So thought to get from ecu

---

hi raffy

it's not difficult in s2000!!!
what tool u using to reading pls .
me too i cant calculate pin!!!!

I read eeprom by orange 5
And as zman said also all my soft didn't ditect pin code

---

Hello all tring to obtain pin code from ecu not succeed
Can any one try ?
Thanks in advance
Ecu s2000 eeprom 95080

Hello, The ECU eep looks like it's in virgin state (contain strings of 11 11 11 11 at PIN locations, so no PIN) but you can check the ECU status by...ECU> parameter.

edit: Ok if you'd like to try again the BSI, here is my pinout...
- none of MCU pins are lifted or directly connected
- lift a pin of the nearby IC marked "this pin may be lifted"
- there could be two types of HW, at connection "9" if the R is 0 then removed the R. But if it's 472 as in the image you can leave it like that. Good luck!

Thanks i will try and report back

[zmann]

Ok, I recall myself. This is the old fashion of BSI-ECU matching in PSA and no more like this after about year 2002. While they are marrying the BSI does not send the PIN to store in the ECU!

[evgenijj]

Yes this dump containes no pin.

---

If you know pin from bsi i can sincronize.

[raffy haddad]

Hello everyone and thanks to all who contribute with my problem to be solved
Zmaan i didn't try your connection because of short time to deliver the car
Instead made immooff by member here on forum and all ok . thanks again

[zmann]

No problem, may be next time or by some other if it's useful.