Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Used HU for 2021 G30
27-08-2022, 00:22 AM,
Post: #1
|
|||
|
|||
Used HU for 2021 G30
Hello i have 2021 G30 ID7, I installed used HU and I code it using esys. but i have message on the screen say component protection. when i read fault code i have fult code : HU missing certificate . is any way to fix it?
|
|||
27-08-2022, 02:02 AM,
Post: #2
|
|||
|
|||
RE: Used HU for 2021 G30
you will need someone to turn off component protection....certificates ip sec.... etc...
|
|||
27-08-2022, 14:44 PM,
Post: #3
|
|||
|
|||
RE: Used HU for 2021 G30
CP cannot be removed from HU only on bench not possible via OBD on car, better to buy a new head unit
|
|||
27-08-2022, 15:40 PM,
Post: #4
|
|||
|
|||
RE: Used HU for 2021 G30
(27-08-2022, 02:02 AM)jaramillo Wrote: you will need someone to turn off component protection....certificates ip sec.... etc... Can you do it?? Or you know someone can do it |
|||
27-08-2022, 18:10 PM,
Post: #5
|
|||
|
|||
RE: Used HU for 2021 G30
(27-08-2022, 15:40 PM)Moeowaisi Wrote:(27-08-2022, 02:02 AM)jaramillo Wrote: you will need someone to turn off component protection....certificates ip sec.... etc... As far as I know you can't remove CP remotely. As someone said above, it will be faster and easier to put on a new headunit. You will get a headache to do it, and it won't be cheap. Right now your biggest problem is CP, next is virgin, FSC...not many people will do it in MGU. Where are you located? • EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
27-08-2022, 18:21 PM,
Post: #6
|
|||
|
|||
RE: Used HU for 2021 G30
Get new MGU and all will be easy forward FSC, cert... i have done it on my G07
|
|||
28-08-2022, 00:12 AM,
Post: #7
|
|||
|
|||
RE: Used HU for 2021 G30
Ok I'm going to get new MGU the thank you all
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content