Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ESYS + ICOM No connection with F10/11 cars.
16-09-2019, 23:44 PM,
Post: #1
|
|||
|
|||
ESYS + ICOM No connection with F10/11 cars.
Hello all,
got a bit weird problem with F series coding. I'm using ICOM Next China clone with ESYS 3.27.1 runing with Luncher 2.7.1 on virtual machine (Parallels Desktop on MacBook Pro). Network port configured for DHCP. Network adapter set for Bridget Connection with Thunderbolt Ethernet in Parallels Desktop. Everything is working great except F10/F11 coding with Esys software. ISTA- D is connecting great with car, all is working as it should in ISTA- D. But when trying to connect via ESYS to make some coding, I got error that there is no connection with the car (error C060). (Log File Attached with config photos) Trying to connect via ICOM/Ethernet with tcp://169.254.92.38:50160 In any other F series cars everything is working as it should. Esys is connecting great with any F30/ F20/ F25 etc, everything is working as it should. I have tried to connect with few F10 cars- allways the same. No connection. *** When trying to connect with ENET cable, there is no problem. *** ---- Connection via VIN is working great with enet cable. ---- ICOM locked with iToolRadar (with unlocked same story) Firewall is OFF. Tried on different system with ESYS 3.30 on VMWare Fusion- same story. WiFi is turned OFF (same with WiFi ON) Tried with engine running, with ignition only as well- nothing changes. Did anyone seen something like this? Any solution? Thanks in advance. |