Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A6 C7 swap cluster with used one
27-09-2019, 22:17 PM,
Post: #1
|
|||
|
|||
Audi A6 C7 swap cluster with used one
Hello,
I want to swap the cluster of an Audi A6 C7 with an used s7 cluster. If I am right i have to do these steps:
Thank you for your help |
|||
28-09-2019, 12:06 PM,
Post: #2
|
|||
|
|||
RE: Audi A6 C7 swap cluster with used one
Okay, I just swapped the cluster and removed the component protection. When removing the component protection it reads the key at the sensor at the dashboard and copies (I think) the immo codes. Then the cluster works. Afterwards I just adjusted the coding by VCDS and everything works fine.
The only problem is that I have the mileage from the new cluster and cannot adjust it because it is over 100km. Which tools do I need to adjust the mileage? |
|||
29-09-2019, 09:48 AM,
Post: #3
|
|||
|
|||
RE: Audi A6 C7 swap cluster with used one
(28-09-2019, 12:06 PM)neo2k Wrote: Okay, I just swapped the cluster and removed the component protection. When removing the component protection it reads the key at the sensor at the dashboard and copies (I think) the immo codes. Then the cluster works. Afterwards I just adjusted the coding by VCDS and everything works fine. If talk about like 100% done! Smok,Avdi(original),dp4,x-tool...........all tool which have high prise! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content