[PUMUKY1]

Hi
As the statement says, I want to change the language to an E82 135I USA from 09 - 2013.
SA853 by SA856
Do I have to do anything else?
I leave a picture of the car kit
Thank you

[emhtuning]

$853 is already English_US + French + Spanish , so Spanish is already loaded without changing anything , you can select Spanish from the language menu .

$856 is Spanish + English_GB + French , basically the same as $853

[PUMUKY1]

In the language menu you have, English UK, Deutsch, Francais.

With ISTA-P I know that Spanish can be retrofitted, but it asks me to program the whole car.

I don't want to program the whole car, because I had a bad experience with an E92 USA. When changing the language, all modules remained in red.

Is there any way to change the language without programming the entire car?

[BMW888]

Use NCSExpert change UC93=>UC91. Remove VO 645,655,697,853,639. Add 698,856. Write FA: CAS,FRM
Code radio with modified FA. it should be done.

[PUMUKY1]

Use NCSExpert change UC93=>UC91. Remove VO 645,655,697,853,639. Add 698,856. Write FA: CAS,FRM
Code radio with modified FA. it should be done.

I have changed everything as you say and still have no Spanish language.

The car has already touched it before, the UC93 model key was already changed by UC91 and removed from VO 645, 655. They have been retrofitted with SA609 professional navigator.

I have removed from VO 697,853, 639 and added 698, 856.

With the VO changed, I connect ISTA-P asks to change four modules

[BMW888]

Use NCSExpert change UC93=>UC91. Remove VO 645,655,697,853,639. Add 698,856. Write FA: CAS,FRM
Code radio with modified FA. it should be done.

I have changed everything as you say and still have no Spanish language.

The car has already touched it before, the UC93 model key was already changed by UC91 and removed from VO 645, 655. They have been retrofitted with SA609 professional navigator.

I have removed from VO 697,853, 639 and added 698, 856.

With the VO changed, I connect ISTA-P asks to change four modules

Do not use ISTAP. Use BMW standard tool (NCSExpert) To code CIC.

[PUMUKY1]

Use NCSExpert change UC93=>UC91. Remove VO 645,655,697,853,639. Add 698,856. Write FA: CAS,FRM
Code radio with modified FA. it should be done.

I have changed everything as you say and still have no Spanish language.

The car has already touched it before, the UC93 model key was already changed by UC91 and removed from VO 645, 655. They have been retrofitted with SA609 professional navigator.

I have removed from VO 697,853, 639 and added 698, 856.

With the VO changed, I connect ISTA-P asks to change four modules

Do not use ISTAP. Use BMW standard tool (NCSExpert) To code CIC.

Thank you very much, you already have Spanish language  

[PUMUKY1]

I want to update the browser maps.
As I said in message 5, the car has been retrofitted with SA609 professional navigator, the navigator is from another car.
To generate the FSC code is done with the donor car's chassis number?

[atomantmk]

Read this thread to learn how to import FSC and activate map.
https://cartechnology.co.uk/showthread.php?tid=23198