Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mechatronic units compatibility
|
17-10-2019, 16:01 PM,
(This post was last modified: 18-10-2019, 11:30 AM by phydor.)
Post: #1
|
|||
|
|||
Mechatronic units compatibility
Hi there guys, what is the compatibility between DSG7 mechatronic units?
Can I replace a 0AM 325 025 H ZE1 (my car, Passat B7 2013) with a 0AM 325 025 H ZJP (Skoda Rapid 2014)? I suppose that ZE1 or ZJP correspond to different gearbox codes? I just need to replace the unit and flash it to latest version for my gearbox? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
17-10-2019, 20:05 PM,
Post: #2
|
|||
|
|||
RE: Mechatronic units compatibility
(17-10-2019, 16:01 PM)phydor Wrote: Hi there guys, what is the compatibility between DSG7 mechatronic units?  No !!! , You make wrong job. Not that is solution. What is damaged and why you changhing DSG Unit ? |
|||
|
|
|
18-10-2019, 10:12 AM,
(This post was last modified: 18-10-2019, 10:14 AM by phydor.)
Post: #3
|
|||
|
|||
RE: Mechatronic units compatibility
(17-10-2019, 20:05 PM)ototest Wrote:(17-10-2019, 16:01 PM)phydor Wrote: Hi there guys, what is the compatibility between DSG7 mechatronic units? Because of these attached errors.Checked also the pressures while idling.Nothing out of the ordinary. Either, i replace the hydraulic accumulator, either I replace the mechatronic unit.I have another one that ends by ZE3, i think. |
|||
|
|
|
19-10-2019, 15:17 PM,
Post: #4
|
|||
|
|||
|
RE: Mechatronic units compatibility
The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.
|
|||
|
|
|
19-10-2019, 18:31 PM,
Post: #5
|
|||
|
|||
RE: Mechatronic units compatibility
(19-10-2019, 15:17 PM)JorBo Wrote: The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.But I ll reflash the unit with the latest flashfile for my gearbox and i ll remove cp online. |
|||
|
|
|
23-10-2019, 17:01 PM,
Post: #6
|
|||
|
|||
RE: Mechatronic units compatibility
(19-10-2019, 18:31 PM)phydor Wrote:(19-10-2019, 15:17 PM)JorBo Wrote: The problem when mixing this gearbox is the component protection for running properly. Maybe the engine starts, try to set the basics settings and adaptations values for move the car, but need a reflash unit and match with the bcm/Immo.But I ll reflash the unit with the latest flashfile for my gearbox and i ll remove cp online. -The P0841 DTCs is a common issue from the mechatronics units on this gearboxs. -Any DTCs after reflash the unit? |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
|
mechatronic change problem | drjb | 3 | 183 |
05-04-2024, 05:40 AM Last Post: drjb |
| 03G906021QA compatibility | Inovator | 2 | 245 |
14-06-2023, 21:27 PM Last Post: oscar89 |
|
| abs pump compatibility | bboctavian | 2 | 403 |
20-10-2022, 15:25 PM Last Post: bboctavian |
|
|
|
DSG 7 0AM mechatronic issue | phydor | 7 | 980 |
11-10-2019, 20:15 PM Last Post: phydor |
| VW 0AM TRANSMISSION MECHATRONIC SWAP | Shinehead | 1 | 466 |
13-04-2019, 09:56 AM Last Post: Senario |
|
|
Skoda DSG7 DQ200 mechatronic | michalkow | 1 | 667 |
04-10-2018, 09:59 AM Last Post: ototest |
|
|
Mechatronic | Poloman | 4 | 2,757 |
26-08-2014, 13:22 PM Last Post: Poloman |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
