Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DSG 7 0AM mechatronic issue
10-10-2019, 17:50 PM,
Post: #1
|
|||
|
|||
DSG 7 0AM mechatronic issue
Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots.
What could be at fault? The hydraulic accumulator?I've seen a repair kit for it but also for the other components too, Thanks |
|||
10-10-2019, 18:04 PM,
Post: #2
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
Did you change oil filter when changing oil in dsg? Maybe sensor fail but check dsg filter. You can check accumulator manual with manometer to see if correct pressure or broken “balloon “
|
|||
10-10-2019, 18:11 PM,
Post: #3
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
(10-10-2019, 18:04 PM)blackTDI Wrote: Did you change oil filter when changing oil in dsg? Maybe sensor fail but check dsg filter. You can check accumulator manual with manometer to see if correct pressure or broken “balloon “This gearbox doesn't need oil change.It has 1,8 l capacity and mechatronics unit and gearbox itself have different oil circuits. |
|||
10-10-2019, 20:20 PM,
Post: #4
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
(10-10-2019, 17:50 PM)phydor Wrote: Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots. First check oil pressure of inside mechatronik, if below than 42 bar , it need repair. Dont make basic settings if pressure is low than 42 bar. |
|||
10-10-2019, 20:56 PM,
Post: #5
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
(10-10-2019, 20:20 PM)ototest Wrote:Yeah, you told me that from what I remember but the fault is intermittent and even more, it appeared yesterday after 2 months.That pressure drop gives me some indication that I should replace the hydraulic accumulator.Nevertheless, i ll take a look tomorrow at the pressure.(10-10-2019, 17:50 PM)phydor Wrote: Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots. Thanks |
|||
11-10-2019, 16:18 PM,
Post: #6
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
So I checked all the pressures I could see, there was nothing below 42 bar.
|
|||
11-10-2019, 18:26 PM,
Post: #7
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
need new mechatronic unit,.. is a common problem, after software update
If you like my post please press
|
|||
11-10-2019, 20:15 PM,
(This post was last modified: 11-10-2019, 20:26 PM by phydor.)
Post: #8
|
|||
|
|||
RE: DSG 7 0AM mechatronic issue
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content