Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E-sys Flash NBT EVO Project
18-10-2019, 12:59 PM,
Post: #1
|
|||
|
|||
E-sys Flash NBT EVO Project
I have F57 Cooper
I am trying to Flash and I am getting the bellow error Enet connected to the router with DHCP server TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2019/10/18-14:45:16.335 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForFlash started [PROGRESS] [] prepareVehicleForFlash finished [PROGRESS] MCDDiagService<id=285200, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=RDBI_IPCONF - ReadDataByIdentifier IPConfig, description=error: positive response with negative content: Subnet mask does not match with subnet mask of master gateway, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE] [] Activate programming mode was not successful for: ECUId:HU_NBT2_0x63 [WARN] [] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [WARN] [HU_NBT2 - 63] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [THROWABLE] [] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [WARN] [] finalizeVehicleFlash started [PROGRESS] [] finalizeVehicleFlash finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "3min 7s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. |
|||
19-10-2019, 08:15 AM,
Post: #2
|
|||
|
|||
RE: E-sys Flash NBT EVO Project
"Subnet mask does not match with subnet mask of master gateway" - use DHCP to automatic generate ip address on laptop
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content