[smilo]

Hi Esys experts,
In order to delete echo mic in E71 where EVO was installed, I'm replacing the OEM car AMP.
It was correctly installed (working fine) but must be flashed to delete the echo problem (already done in the past in other Exx cars without issue)

I'm stuck on flashing the AMP_TOP (Not AMP_TOPHR nor AMP_TOPLR / AMP_TOPHB) - I'm not able to generate SVT_Target with AMP_TOP - I'm trying to do it in a F3x (probably this is the problem). I used the OEM AMP car FA (with the correct prod. date / VIN / etc) without success.
The AMP is for a F01 from 2008. If I change I-step shipm to a iLevel from 2010, I have the SVT but for AMP_TOPHR (not AMP_TOP)

I can provide files: FA used for flash (with OEM AMP car info) / OEM CAFD of the AMP / the SVT actual where I try to flash - F3x / print screen from ESYS

If someone can help to generate a TAL to flash this module please

[emhtuning]

you will not success flashing F01 L7 amp in F3x , I already spent days trying to do that remotely on an F30 .

then I managed to flash it on bench using NBT headunit and Most between headunit and amp , you need to use F01/F02/F07/F25 ( any of these ) FA to flash the amp.