Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
mechatronics cloning
|
27-10-2019, 13:34 PM,
Post: #1
|
|||
|
|||
|
mechatronics cloning
Have a 2012 bmw x5 3.5i xdrive and need a mechatronics unit. This transmission is an 8hp in an E70 vehicle. So far I have not found anyone capable of cloning or virginizing a mechatroncis unit. If it were a 6hp no problem. If it were an F chassis 8hp no problem. Anyone solve this issue?
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
28-10-2019, 04:41 AM,
Post: #2
|
|||
|
|||
|
RE: mechatronics cloning
While this should be possible, I'm not aware of any tools that can do this. I suspect there is a tricore processor inside that could be accessed in boot mode and cloned.
I would strongly suggest repairing your current mechatronic if possible. Are you getting turbine speed sensor issues? |
|||
|
|
|
28-10-2019, 05:30 AM,
(This post was last modified: 28-10-2019, 12:39 PM by Clusters.)
Post: #3
|
|||
|
|||
RE: mechatronics cloning
(27-10-2019, 13:34 PM)dfitz21 Wrote: Have a 2012 bmw x5 3.5i xdrive and need a mechatronics unit. This transmission is an 8hp in an E70 vehicle. So far I have not found anyone capable of cloning or virginizing a mechatroncis unit. If it were a 6hp no problem. If it were an F chassis 8hp no problem. Anyone solve this issue? Module 11: Yanhua Mini ACDP Authorization with Adapters Clear EGS ISN can be Do this Clear ISN Reset Adaptation Backup Coding Recover Coding |
|||
|
|
|
28-10-2019, 07:57 AM,
(This post was last modified: 28-10-2019, 12:39 PM by Clusters.)
Post: #4
|
|||
|
|||
RE: mechatronics cloning
(28-10-2019, 05:30 AM)imex Wrote:(27-10-2019, 13:34 PM)dfitz21 Wrote: Have a 2012 bmw x5 3.5i xdrive and need a mechatronics unit. This transmission is an 8hp in an E70 vehicle. So far I have not found anyone capable of cloning or virginizing a mechatroncis unit. If it were a 6hp no problem. If it were an F chassis 8hp no problem. Anyone solve this issue? 8HP in E series? I doubt it. Yanhua has several things that don't work. I have the full BMW package. Be sure what you say. |
|||
|
|
|
28-10-2019, 12:38 PM,
(This post was last modified: 28-10-2019, 12:39 PM by Clusters.)
Post: #5
|
|||
|
|||
RE: mechatronics cloning
(28-10-2019, 05:30 AM)imex Wrote:(27-10-2019, 13:34 PM)dfitz21 Wrote: Have a 2012 bmw x5 3.5i xdrive and need a mechatronics unit. This transmission is an 8hp in an E70 vehicle. So far I have not found anyone capable of cloning or virginizing a mechatroncis unit. If it were a 6hp no problem. If it were an F chassis 8hp no problem. Anyone solve this issue? can you confirm this? |
|||
|
|
|
29-10-2019, 15:24 PM,
Post: #6
|
|||
|
|||
|
RE: mechatronics cloning
Again.. If you have cas from same donor car it can be done. No other way using aviable tools. Btw it's not reseting egs just align everything to work
|
|||
|
|
|
30-10-2019, 07:19 AM,
Post: #7
|
|||
|
|||
RE: mechatronics cloning
(28-10-2019, 05:30 AM)imex Wrote:(27-10-2019, 13:34 PM)dfitz21 Wrote: Have a 2012 bmw x5 3.5i xdrive and need a mechatronics unit. This transmission is an 8hp in an E70 vehicle. So far I have not found anyone capable of cloning or virginizing a mechatroncis unit. If it were a 6hp no problem. If it were an F chassis 8hp no problem. Anyone solve this issue? No , Yanhua can only do F serie 8hp and E serie 6hp .. I didnt find any program that can do it. I did excange transmission on BMW e70 8hp and putelectronic that is in transmission from my car (the fault was not in electronic) , all worked. |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| MSV90 cloning by hexprog | lustek | 32 | 3,392 |
19-09-2022, 18:18 PM Last Post: lustek |
|
|
MSV90 cloning | MPTeam | 3 | 631 |
12-07-2022, 11:53 AM Last Post: bmchicago |
| Bmw f30 ecu cloning | Vartaliotas | 3 | 685 |
30-03-2022, 16:01 PM Last Post: BMWzone |
|
|
|
2021 DME Cloning Software/Hardware | AlexRom | 5 | 1,593 |
09-02-2022, 15:43 PM Last Post: Enabled |
|
|
8HP45 transmission mechatronics matching on valve body -- BMW F30-- 316i - 2012year | jonazizbey | 5 | 610 |
01-10-2019, 08:03 AM Last Post: Alexandru.k_24 |
| CIC-MID Cloning via FTP (FSC)? | ExiizZ | 3 | 650 |
15-05-2019, 23:08 PM Last Post: ExiizZ |
|
| 2008 BMW 7 series DME 7 Cloning need help | koziol | 6 | 1,413 |
08-06-2018, 22:56 PM Last Post: Alex_Tushino |
|
| Solved ✔ Mechatronics problem... | Patrick11021979 | 20 | 5,678 |
11-03-2017, 20:41 PM Last Post: Patrick11021979 |
|
|
BMW E83 mechatronics data | os1968 | 1 | 820 |
22-01-2016, 07:36 AM Last Post: Kamcio |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
