Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Mini R56 - Cannot reset VANOS adaptations
15-01-2022, 18:12 PM,
(This post was last modified: 16-01-2022, 14:44 PM by Clusters.)
Post: #1
|
|||
|
|||
Mini R56 - Cannot reset VANOS adaptations
Been pulling out what's left of my hair with this,
Car is 2006 Mini R56 with N12 engine, DME is MED172 No matter what I cannot get the VANOS adaptations reset, ISTA+ reports IFH-006 Command not accepted Tried 3 different versions of INPA and datens including the one posted here today by @Maron All the INPA's reported ERROR #98 SYS-0008 JOB NOT FOUND, Ideas please |
|||
15-01-2022, 18:24 PM,
Post: #2
|
|||
|
|||
RE: Mini R56 - Cannot reset VANOS adaptations
What ilevel does the mini have?
|
|||
15-01-2022, 19:07 PM,
Post: #3
|
|||
|
|||
RE: Mini R56 - Cannot reset VANOS adaptations
I believe it has never had the iLevel updated so it will be the original 2006
|
|||
15-01-2022, 19:10 PM,
Post: #4
|
|||
|
|||
RE: Mini R56 - Cannot reset VANOS adaptations
There was a vanos firmware fix at some point don’t remember from what ilevel. So try to update dme first if it has old ilevel.
|
|||
16-01-2022, 08:10 AM,
(This post was last modified: 16-01-2022, 08:44 AM by maxwell4321.)
Post: #5
|
|||
|
|||
RE: Mini R56 - Cannot reset VANOS adaptations
Trying to update by WinkFP using Update ZUSB and VIN then when I select Program I get this error,
Assembly identification number not found in files determined by xxkfconf.da2 According to UIF DME is MEV17_2 ZB is 7572260 but part number is 7600076 I looked up the part numbers on realoem for replacement ECU and that number does not exist. |
|||
16-01-2022, 14:35 PM,
Post: #6
|
|||
|
|||
RE: Mini R56 - Cannot reset VANOS adaptations
Ok have now solved this, updated ILevel with Ista/P and used Ista+ to reset the adaptations
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content