Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ VVDI erase error
20-01-2022, 09:15 AM,
Post: #11
|
|||
|
|||
RE: VVDI erase error
For this eeprom I use another programmer.
If I helped you press magic buttons
|
|||
23-01-2022, 21:19 PM,
(This post was last modified: 23-01-2022, 21:21 PM by Liteace.)
Post: #12
|
|||
|
|||
RE: VVDI erase error
This is the chip from the Golf cluster, I selected "Microchip",
I also tried to up the voltage to 4.5 but same error |
|||
23-01-2022, 21:51 PM,
Post: #13
|
|||
|
|||
RE: VVDI erase error
Chinese Xprog 5.55
|
|||
24-01-2022, 10:43 AM,
Post: #14
|
|||
|
|||
RE: VVDI erase error
Try something:
In the read content replace everything with FF and then write it. There is that the delete function does not work! Vojnó
Press Thanks and reputation if this post helped you. |
|||
25-01-2022, 18:36 PM,
(This post was last modified: 25-01-2022, 18:37 PM by Liteace.)
Post: #15
|
|||
|
|||
RE: VVDI erase error
Just tried that, I fill all with FFFF's, press "write" and same error
|
|||
25-01-2022, 18:41 PM,
Post: #16
|
|||
|
|||
RE: VVDI erase error
do not use adapter
solder eeprom and try again |
|||
25-01-2022, 19:08 PM,
(This post was last modified: 25-01-2022, 19:09 PM by Liteace.)
Post: #17
|
|||
|
|||
RE: VVDI erase error
Ive just tried that and same problem
|
|||
25-01-2022, 19:27 PM,
Post: #18
|
|||
|
|||
RE: VVDI erase error
if reinstall software not solve your problem then you need to contact support or to use another programmer
|
|||
25-01-2022, 20:27 PM,
(This post was last modified: 25-01-2022, 20:27 PM by Liteace.)
Post: #19
|
|||
|
|||
RE: VVDI erase error
Solved at f88king last, I FFF'ed with carprog, I then wrote with carprog, I then compared with VVDI and bingo
|
|||
Reputation: +2 - ROD-BENDERS [+1] , al70 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content