[Jasonpe61]

Bad or old script in INPA....but this is not now important...for this job INPA not need.
Like I sad before...and on this way have any time from first attempt done without any problem.
1.Flash szl with car vin
2.Code szl
3.With tool32 or ista+ senzor calibrate
4.Start system time that airbag lamp go off

thanks so just to clarify

1. winkfp flash SZL ZUsb
2. code SZL using NCSExpert code to default
3.Tool 32 sensor calibrate
4. Start system time

?

Thanks

[TomoR]

Bad or old script in INPA....but this is not now important...for this job INPA not need.
Like I sad before...and on this way have any time from first attempt done without any problem.
1.Flash szl with car vin
2.Code szl
3.With tool32 or ista+ senzor calibrate
4.Start system time that airbag lamp go off

thanks so just to clarify

1. winkfp flash SZL ZUsb
2. code SZL using NCSExpert code to default
3.Tool 32 sensor calibrate
4. Start system time

?

Thanks

Yes....if 1 an 2 its done without errors then 3 and 4 can be done with ISTA+.

[elthox]

its been some time not calibrating E60 but i think is not dsc prg. Check in szl.prg if there is the function of calibrration.
Always assuming the coding has been done.

[Jasonpe61]

Thanks for your help unfortunately dropped my laptop and smashed it so another one is on Order once I manage to get to try it out il let you guys know

[danis11]

Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process.
Indicate in ISTA-P that szl has been replaced and say that you need to register it in full. It will even update the program if you want it.

[Node]

ISTA-P will do it even if SZL is used.

[jaki]

Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process.
Indicate in ISTA-P that szl has been replaced and say that you need to register it in full. It will even update the program if you want it.

Can't agree more

[elthox]

but if ista p forces to update other modules you dont wanna update then think twice

[Jasonpe61]

Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process.
Indicate in ISTA-P that szl has been replaced and say that you need to register it in full. It will even update the program if you want it.

I didn’t know you could , I haven’t seen any information about using ista-P to do this .. what’s the steps on doing it with this program

Thanks

[Node]

but if ista p forces to update other modules you dont wanna update then think twice

When using loader in expert mode you can uncheck all other modules.

---

Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process.
Indicate in ISTA-P that szl has been replaced and say that you need to register it in full. It will even update the program if you want it.

I didn’t know you could , I haven’t seen any information about using ista-P to do this .. what’s the steps on doing it with this program

Thanks

Run it. Identify car. Tell it SZL was replaced. Wait some time. Done. After that initialize steering ange using ISTA+.