Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
After retrofit 6WB , AhM fault
19-02-2022, 12:02 PM,
Post: #1
|
|||
|
|||
After retrofit 6WB , AhM fault
I have a problem after replacing 6WB, I have fault a trailer module.
ISTA shows error „No massage (display, check control bypass 02, 0x329) receiver Kombi, AHM transmitter. „ Car is F30 pre LCI equipped with NBT EVO. AHM is from the pre-lift model, i.e. there are two trailer modules !!!MGU Virgin and Custom FSC!!!
EVO ENTRYNA2 FSC Remote 8HP Reset Kafas 4 Virgin If I help press rep and THX |
|||
19-02-2022, 14:39 PM,
Post: #2
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
you coded your kombi incorrect.
MGU Patching/Virginizing.
Feature Installer codes. Physical NBT EVO Repairs. CarPlay activations. Remote BMW Coding. [email protected] |
|||
05-04-2022, 14:50 PM,
Post: #3
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is
E11505 No massage (display, check control bypass 02, 0x329) receiver Kombi, transmiter " and the hitch fault appear on dashboard. So , did you find the solution at your problem. If I helped you press magic buttons
|
|||
05-04-2022, 15:38 PM,
Post: #4
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
Solution is easy, just code cluster without trailer in FA.
|
|||
05-04-2022, 15:56 PM,
Post: #5
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?
If I helped you press magic buttons
|
|||
05-04-2022, 16:12 PM,
Post: #6
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
05-04-2022, 16:27 PM,
Post: #7
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 16:12 PM)PsevDo Wrote:(05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac Thanks for replay. Should I do it like I say or do it with FDL editing . On FDL cant find where to disable . If I helped you press magic buttons
|
|||
05-04-2022, 18:05 PM,
Post: #8
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 14:50 PM)pepi Wrote: I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is Simply FDL code the 6WB instrument cluster. Set the following parameters to "nicht_aktiv":
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 289 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
Bmw x1 f48 disabled fault | kuki88 | 7 | 273 |
17-05-2024, 08:00 AM Last Post: kuki88 |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 51 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 249 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 412 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 110 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 222 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 103 |
08-05-2024, 14:22 PM Last Post: hitit |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 892 | 471,117 |
07-05-2024, 04:30 AM Last Post: SkeYT |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 1 | 154 |
30-04-2024, 19:37 PM Last Post: gabur431 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content