[umbralui]

Best thing is to open the case of the interface and see exactly what you have inside, there are cases when the outside case is V2, and inside the surprise, you find the old version.

[umbralui]

How can i see if my cable is SMTF405 STM32F407 and STM32F429device, or ATMEGA or ATMEL?

simply just open the interface and check what you have inside

[dani3lxxl]

---

Hi, i can't use this version with atmega162.
How can solve this problem for use this version?

Did you read first post?  
Vcds vag-com 22.3 + Loader Free (cartechnology.co.uk)

sorry, on aliexpress was devices with atmega162 and software version 22.3, only with this 3 interface use this version??

thanks!

[muhad_01]

What is the last software can work with this cable
Vcds v2 ATMEGA162+16V8B+FT232RQ+SI9241+ATA6561

[locarno]

So VCDS 22.3 is not supported for Atmega chip?

[jhon006]

So VCDS 22.3 is not supported for Atmega chip?

Hello, you can read page2  ..
Vcds vag-com 22.3 + Loader Free (cartechnology.co.uk)

[dani3lxxl]

So VCDS 22.3 is not supported for Atmega chip?

And works on ATMEGA162...looks on photos

   

[106tuner]

My cable give name Ross-Tech HEX-V2,

and i use VCDSLoader.exe for vcds 22.3

you can use this loader for Atmega, Atmel cip.. PM for password

working verywell. thank you.

[goldtar]

My cable give name Ross-Tech HEX-V2,

and i use VCDSLoader.exe for vcds 22.3

you can use this loader for Atmega, Atmel cip.. PM for password

Tried this - I have ATMEL809 - keep getting interface not found - any ideas??

[jhon006]

My cable give name Ross-Tech HEX-V2,

and i use VCDSLoader.exe for vcds 22.3

you can use this loader for Atmega, Atmel cip.. PM for password

Tried this - I have ATMEL809 - keep getting interface not found - any ideas??

port usb faulty, cip inside need to flash manualy..