[maxwell4321]

Maybe I am having a bit of a brain fart with this,

I just was online to a 2014 F22 that had lost its CAFD in the Kombi, apparently he was driving and the Kombi rebooted itself then he had several faults come up.

All HWEL, SWFL etc were in black text, used Detect CAF then coded without problems

All HWEL, SWFL etc were still in black text and this included the new CAFD I just injected however the Blue/Red flag appeared next to KOMBI(60).
Tried different CAFDs but same result with all. 
there were no errors at all when coding the Kombi.

What's going on ?

[It3_Magic]

Maybe I am having a bit of a brain fart with this,

I just was online to a 2014 F22 that had lost its CAFD in the Kombi, apparently he was driving and the Kombi rebooted itself then he had several faults come up.

All HWEL, SWFL etc were in black text, used Detect CAF then coded without problems

All HWEL, SWFL etc were still in black text and this included the new CAFD I just injected however the Blue/Red flag appeared next to KOMBI(60).
Tried different CAFDs but same result with all. 
there were no errors at all when coding the Kombi.

What's going on ?

restart your esys and see if still there

[SweetBMW]

The flag appears when there are changes. You pressed detect cafd and loaded a new one. This is a change. So. Flag. Just press reset svt ans read ecu again. See?

[maxwell4321]

The flag appears when there are changes. You pressed detect cafd and loaded a new one. This is a change. So. Flag. Just press reset svt ans read ecu again. See?

Ok thanks, knew it was something simple just couldn't figure what, I was doing it last night after a very long day and just couldn't think straight.

[HU_man]

Choose wrong car when connect to esys ? double check.