Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ W209 cluster to w203
29-03-2022, 21:29 PM,
Post: #1
|
|||
|
|||
W209 cluster to w203
Hello people, i do have a w209 clk cluster for my w203 2003. Everything works except the mileage counter. Tried to syncronize with old milage but only accepts when the cluster is under 1000 km. Tried to reset cluster with digiprog, tried with eeprom but without success... Can anyone help me to reset the mileage on the w209 cluster?
|
|||
30-03-2022, 04:03 AM,
Post: #2
|
|||
|
|||
RE: W209 cluster to w203
You have to get access to eeprom to change anything.
Basically seed/key is needed if without touch the mainboard. |
|||
30-03-2022, 20:57 PM,
Post: #3
|
|||
|
|||
RE: W209 cluster to w203
(30-03-2022, 04:03 AM)BabeH Wrote: You have to get access to eeprom to change anything. Yeah, i know... I allready tried to connecting to the eeprom chip after disassembly. |
|||
14-05-2022, 19:41 PM,
Post: #4
|
|||
|
|||
RE: W209 cluster to w203
Hey, update for the people searching a solution for this problem. This fixed mine and hope it will fix yours aswell. I took the eeprom of the cluster out (in my case mine was a 24U17 / 24C16) take the binary file and FF the first 4 lanes ( 00000000, 00000010, 00000020, 00000030). This will fully reset the Odo (BUT YOU WILL HAVE TO SYNCRONIZE THE ODO WITH EZS OR IT WILL NOT WORK). You can do the Ezs sync in DAS / Xentry. This will fully sync your new odo with your ezs and will show your mileage. Hope this fixes your problem. Cheers...
|
|||
Reputation: +1 - al70 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content