Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
AUDI CAN GATWAY 8w7907468 Help
20-04-2022, 18:11 PM,
Post: #1
|
|||
|
|||
AUDI CAN GATWAY 8w7907468 Help
When I used ODIS Engineering 9.2.2 to flash the module address 19 "can gateway" , the flashing went to 93% then stopped and showed error , the ignition wont turn on now.
note: only the CAN Gateway module can communicate with the diagnostic tool, all other modules have no communication, i believe the Can Gateway module is stuck in boot mode. I would appreciate it if anyone has an idea how to reflash this module without error.... by the way i used "8W7 907 468 H11 2079"for reflashing see below the module details Address 19: CAN Gateway (J533) Labels:* None Part No SW: 8W7 907 468 HW: 8W7 907 468 Component: Gateway H11 2079 Revision: 3M130039 Serial number: 3983M050016227 Coding: 0301000100000F407F070000005900324C920007080000000175078E00000000 Shop #: WSC 31414 790 00001 GVL: 01503C0408040000C0BC08000002C80001080000000000000000000000000000 ASAM Dataset: EV_CGateCONTIAU491 002040 ROD: EV_CGateCONTIAU491_002_AU49.rod VCID: 0814669AB38D3FCF82-805C |
|||
21-04-2022, 21:05 PM,
Post: #2
|
|||
|
|||
RE: AUDI CAN GATWAY 8w7907468 Help
What is original HW/SW and name of file which you trying to flash
|
|||
Reputation: +1 - al70 [+1] | |||
22-04-2022, 23:21 PM,
Post: #3
|
|||
|
|||
RE: AUDI CAN GATWAY 8w7907468 Help
the original HW/SW is H11 2079 and i use the same flash " FL_8W7907468_2079___S.frf"
i use odis E 9.2.2 and 14.1 , in both the flashing stop at 93% the give me error the details of my original module in below Address 19: CAN Gateway (J533) Labels:* None Part No SW: 8W7 907 468 HW: 8W7 907 468 Component: Gateway H11 2079 Revision: 3M130039 Serial number: 3983M050016227 Coding: 0301000100000F407F070000005900324C920007080000000175078E00000000 Shop #: WSC 31414 790 00001 GVL: 01503C0408040000C0BC08000002C80001080000000000000000000000000000 ASAM Dataset: EV_CGateCONTIAU491 002040 ROD: EV_CGateCONTIAU491_002_AU49.rod VCID: 0814669AB38D3FCF82-805C |
|||
23-04-2022, 07:29 AM,
Post: #4
|
|||
|
|||
RE: AUDI CAN GATWAY 8w7907468 Help
what file did you flash 1st time when you got error?
|
|||
23-04-2022, 09:28 AM,
Post: #5
|
|||
|
|||
RE: AUDI CAN GATWAY 8w7907468 Help
i told you bro, I flash the module with the same number "FL_8W7907468_2079___S.frf"
i didnt used diffrent flash... DOES ANYONE HAVE THE PIN CONNECTION FOR THE PROCCESSOR SPC5646, THE VVDI PRO CAN READ THIS CHIP , BUT I NEED HELP FOR HOW TO CONNECT |
|||
24-04-2022, 18:21 PM,
Post: #6
|
|||
|
|||
RE: AUDI CAN GATWAY 8w7907468 Help
Why did you flash this module with same version? what profit?
try this file |