[ivannzowa]

I meet this customer who lost key for audi Q7,he order another key so help me i need to register it.
please anyone with the idea

[totalkey]

What tools do you got?

---

if you read ezs kessy, i can give you cs and pin, and you need to prepare transponder

[Vlado ATM Chiptuning]

You must say what tool do you have, read mc9s12dg128 and you need to prepare transponder with Component security.

[BigJ]

You must say what tool do you have, read mc9s12dg128 and you need to prepare transponder with Component security.

@Vlado kljucar Thanks for this info.

I have a similar problem maybe you can point me in the right direction.
Have a Q7, no working keys. I got another transponder (Megamos 8E), read out the dump from the 9S12DG128, and set it all up using Tango. I program the modified dump back into the 9S12DG128, but VCDS still only shows 1 key but Tango shows 2, and obviously the car dont start. The new transponder is detected in the car but not authourised.
Any help will be much appreciated

Regards
J

[chriskross]

I always using avdi for this job is working 100%.


@bigJ when you put in the new key is the ezs opening?

post the dump.

which tools are you using to read the eeprom?