[MiKa]

Hi,
please help with disable indirect TPMS,
error log:
----------------------------------------------------------------------------------
               Address 03: ABS Brakes       Labels: 6R0-907-37x-ESP90.clb

Control Module Part Number: 6C0 907 379 K    HW: 6R0 907 379 BA
  Component and/or Version: ESP9.0i       H03 0004
           Software Coding: 41F5247D892833C7091910720055822491CC9008000BC8F98F00
            Work Shop Code: WSC 13765 031 00000
              ASAM Dataset: EV_Brake1ESP90iBOSCHPQ26 100020 (SK26)
                       ROD: EV_Brake1ESP90iBOSCHPQ26.rod
                      VCID: 373ED0DD8E8ABF3672-8062
Fault Codes have been Erased

1 Fault Found:
0608 - TPMS Display 
          C1146 F0 [137] - Not Available
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 2
                    Reset counter: 241
                    Mileage: 140979 km
                    Date: 2022.08.02
                    Time: 07:31:32
----------------------------------------------------------------------------------

Thanks in advance,

MiKa

[paui]

your VIN? i need this for calculate coding

[MiKa]

...................................................

[paui]

it's strange the last byte stands for TPMS or XDS and it's set to 0 so it's not coded for either.

EDIT: i think you have Problems with the ABS sensor rings

[MiKa]

it's strange the last byte stands for TPMS or XDS and it's set to 0 so it's not coded for either.

EDIT: i think you have Problems with the ABS sensor rings

Yes I know about problem, request was disable/remove from coding TMPS

[paui]

No is not possible it is off in coding.

[nirvananils]

Here you are, this coding should disable it:
41F5247D892833C7091910720055822491CC9008000B08F98F00