[disinfetor]

THIS TOPIC IS ABSOLUTE. DONT PM ME FOR IT. PLEASE SEE MY LAST SW.

http://cartechnology.co.uk/showthread.php?tid=7981


Update 08.10.2014:
- Download links updated as dl-2014-10-09.txt.
- Winrar 5.11 patched added to downloads.
- Paragon Hard Disk Manager 14 Premium Edition, ISO and Setup added to downloads.
- SDmedia v01.2014 NoTrkUnmogBus English only removed from downloads (use full)

I HAD A HARRDISK CRASH.
lot of files were on it. It was 2TB harddisk filled with all needed programs. And no, I have no backup harddisk.
I am in depression, so please dont be angry if I responce too slow to your pm.
Today I will buy a new harddisk and I hope I find all my needed programs and files again. Thank you for support!

the first native running Universal Xentry/DAS System without needing any pc virtualization.
It its a portable system with lot of MB stuff.
It will be a xp system installed in VHD-File, which can be located everywhere (USB or Hard-disk) and being booted and run natively by a boot-loader placed on a USB-Stick (or on local harddisk). So no change to the running system and without any virtual pcs.


with the Bootloader+VHD+DBs methode:
+No need for to make any change on the laptop you will use. Even you dont need to have a harddisk in the laptop.
+No need for seperate harddisks for each diagnosis System.
+No need to be worried if the laptop has a irreparable software or hardware error, and it will not run.
+No need to split your harddisk to many annoying partitions.
+No need to mixup your harddisk with many Windows versions.
+No need to waste ununsed space on each system, when you can place data on a common partiton.
+No need to be worried about having any unwanted changes to the diagnosis system from someone else, as it has build in protect sandbox-functions.
+No need to fear from ruining your laptop system when removing or replacing the diagnosis system.
+No need for big harddisk storage for huge vmware files, when you only need to have DAS/Xentry (24.5GB)
+No need for virtual PCs anymore!
+No need for powerful cpus anymore!
+No need for driver configurations at host system anymore!


This system has 3 parts:
- Bootloader: This needed to get the base system loaded and run.
- VHD-file: This is the base system, where Windows XP with MB software are in.
- DB-files: These are the DB files for the MB software as WIS, EPC, Sdmedia...

The bootloader will scan all partition for the vhd file and loaded from where it is found.
Xentry/DAS, WIS/EPC and SDmedia have not to be on same drive.

Once Xentry/Das system booted, you can add your hardware specific drivers, if there any missing. I integrated more than 1,5 GB of drivers in Windows to be used for the detected hardware. Before doing anyting new, restart the system 2 times as the first boot will detect changed hardware (takes time), and the seconds installs it. See the folder "may needed" on the desktop, if you have non-working drivers in device manager.
it is optional to install drivers to use the system. You need only to have get your USB-rs232-adapter running if you use c3, or LAN-driver if you have SDconnect.
The keys are hardware related, so you will need to generate new keys with the keygen provided on the desktop each time you use this system with new hardware.

You can use this system on real PC or in a virtual PC.
I prefer to use on real PC where it works at fastest and portable.


For real PC you need:
1. A boot device to install and run the bootloader e.g.:
- Your internal harddisk of your PC (possible issues: uefi-boot, ahci-sata)
- USB-Drive (drive will be formatted) (posible issues: uefi-boot)
- CD/DVD-Drive (bootloader placed on CD/DVd iso)

2. for the VHD-file: you have to place it in ONE-PART (contiguous) on root of a writable drive, this can be:
- internal HDD (fastest system) (possible issues: uefi-boot, ahci-sata)
- USB-Drive (Some old USB-Sticks are really slow and may cause bad system performance) (possible issues: uefi-boot, allinging)

3. for DB (optional): they have to place it on root of a drive, no need to be contiguous, this can be:
- Your internal harddisk of your PC.
- USB-Drive (Some old USB-Sticks are really slow and may cause bad system performance)
- burned to a DVD/BR
PS: after you place the "dbtarget"/"medbibtarget"/"DisAssTarget"/"StarfinderTarget" directory in root of a drive, run the fix bat file to make the link correct! If are in subdirs, they will fail to work!

For Virtual Machine you need:
1. for the VHD-file: you have to add as first IDE virtual harddisk file.
2. for DB: they have to place it on root of second IDE virtual harddisk file or any real drive connected to the virtual machine.
3. You must configure your virtual machine com-port.

The system is configured and worked with c3. Tested myself with many cars.
Tested with: -Intel C2D Laptop, -Intel i5 PC, -Intel Atom N455 Tablet
Cars: -w204, -w209, -w211

System contents:

DXVEWSSd14Sf08Da03 Edition v2014.09.26 by disinfetor (base 24,5GB*)
Mega MB Diagnose collection (24,5GB*+45GB)

DAS/Xentry 07.2014 - Multi-Langbase)---------------------------------------------------
+ all addons
+ DAS languages
+ Missing pictures Xentry
+ bin folder fix*
+ Standalone DAS (use the patch provided)
+ IE restrictions removed
+ Blacklist fix
+ Startup fix
+ Offline progranvning fix
+ cal.ini's set for PartD C3
+ Internet filter removed
+ the lame antivirus removed
+ Wallpaper with notes*
+ prototype 212,207,... fixed*
+ "may needed" added with useful stuff*
+ new AddOns 3938-3958*
+ BG update service disabled*
+ tomcat7 shutdown fixed*

Vediamo v4.02.02 - Multi-Langbase)-----------------------------------------------------
+ com2 port set (as Xentry)
+ Patched (Luis Andre)
+ 1079 Vediamo cbf files
+ 488 from Xentry 04.2014

WIS+EPC v07.2014 - Multi-Lang:*-(optional full:35.3GB)------------------------------------
+ seperated WIS/EPC DB-DLs*
+ only WIS DB:11.3GB* (bug: if not exist make a "epc" folder inside dbtarget)
+ EPC-NoBusTrkUnmg DB:16.5GB*
+ EPC-addBusTrkUnmg:6.7GB*
+ Linked to external DB
+ local EWA-net within Xentry
+ WIS work within Xentry
+ Password in header EWA-NET
+ Session Token Validity fixed
+ IE kiosk mode (disable by F11)
+ User: admin, PW: admin1
+ Price List PLV68-1 6.2014 De/En
+ Pass saved by IE
+ "may needed" updated*

SDmedia v01.2014 - Multi-Lang:*-(optional full:7.6GB)-------------------------------------
+ NoTrkUnmogBus German only:2.5GB*
+ NoTrkUnmogBus English only:2.2GB*
+ Linked to external DB
+ sdmedia dir fix
+ SDmedia Lang change
+ "may needed" updated

Starfinder v2008 - En only:*-(optional 1.9GB)---------------------------------------------
+ Linked to external DB
+ icon fixed

Disassemby Assistant v2003 - En only:*-(optional 0.7GB)-----------------------------------
+ Linked to external DB
+ icon fixed

------------------------------------------------------------------------------------------
+ Acrobat Reader 7.0.8 + No Low space alert + "Open file location" menu* + MFT and FS optimized* + PDF Printer added*+ Smaller partitions/vhd* + Autoupdate Srv. dis.* + Standby disabled*

*=new in this release (or re-applied)
------------------------------------------------------------------------------------------

Donate if you like my work and want it to continue. Paypal:-> [email protected]


The most problem can be the used USB-rs232 adapter. I use my own programmed adapter for that, which works great! PL-based adapters doesnt work good.

PLEASE! PLEASE! PLEASE! post comment if it worked or not with these information:
-PC hardware: CPU,RAM
-VHD-storage place: Local hard-disk, USB2.0/3 drive
-Mux: C3,C4...
-Connection: Direct USB, rs232 to USB adapter (please model), direct Rs232 connection
-Tested cars: eg w209-2002
-Tested functions: eg adaptation, erasing errors,...
-Not working, Bugs, suggestion:


PS:
-If you want only Xentry/DAS and not WIS-EPC-SDmedia: then you dont need to download Medbibtarget and dbTarget files.
-If you get bluescreen with 0x0000007B error and no error file: in the windows boot screen (where at with the 3 seconds delay is) try to select other HAL. Old celerons for example are single core CPUs adn may cause this error by default the setting for multi-core CPU is active. Test also other options if this not not worked, one of them may still work.
-If your PC hangs while loading Windows animation (or on black or blue screen) and you have the VHD on the internal harddisk: you may have the AHCI issue of SATA drives. Windows XP has no direct SATA support and this causes this hang. To fix this you may change your BIOS setting. Try searching after SATA Configuration or On chip SATA. Select Legacy IDE or Native IDE instead of AHCI. Windows XP doesn't have all drivers to recognize AHCI, so disable it . I installed several AHCI drivers in the system and my laptop with intel chip is working in AHCI mode. Please share on which Hardware it worked with deactivated AHCI, and on which with active AHCI (an AHCI device is active in device Manager). In Native native IDE mode, the SATA controller looks and acts like a standard ATA controller that the basic driver will recognize, but you lose the AHCI features, which is not in XP anyhow. If not worked then place vhd on usb-drive.
-if you have black-screen at bootloader, no boot media found when selecting boot media or windows 8 boots directly: then disable UEFI if active. deactivate: Secure Boot, deactivate: Fast Boot, activate: CSM (Legacy Mode insted of UEFI). If it is not posible, use MBR-BIOS-boot anabled PC. Updating BIOS may help, as some MBs have a non working lagacy-boot mode.
To enter UEFI from Windows 8: http://www.youtube.com/watch?v=gDcf3Ow6XjY
-If the DAS shortcut doesnt work: I applied the standanlone DAS file, but updating the system with addons has disabled it. So Running DAS outside Xentry will not work. Please apply the patch -DAS32R2 (07.2014) again. It can be that also other functions were disabled by the last updates. Please share if someting doesnt work or missing.
-If you get a blue screen when you boot and get 0x0000007E "WDFLDR.SYS" error: then rename this file in c:\windows\system32\drivers. Dont blame me, blame MS. You can mount vhd in windows 7/8 or use a vhd mounter program. (I allready applied intelppm-fix to prevent blue screen caused by chaging between AMD and Intel CPUs)

[/color][/b]


IMPORTANT: Dont ask me for support on PM. Write your problem here!

Leechers are not welcome. They will be not even be able to get the Base-vhd file. You must prove you are not a leecher by having at least 25 usefull posts in the forum.

password on pm. Dont forget to thank, give a rep and rate! I have many posts, so you must tell me for which post you are asking the password for!

I need help to fix the following:
1. Enable to boot from USB 3.0 port with full USB 3.0 speed.
2. Enable to boot as efi.
3. Fix the ehci-sata boot problem
4. Fix low performance on USB-Stick. (not on USB-HDD) allginment?

-----------------------------------------------
The System runnning:


Connecting and Testing C3:


Inside Xentry:


Pre configured Sata-HDD in a IDE-DVD-Caddy:


All donations left from costs will be given to a local gevornment-approved charity organisation.

dl-2014-10-09.txt
File Type:
Downloaded:	195 times
Size:	4.25 KB

[Batam]

Hi,

I am suprised to see no post on this thread. It's a huge work you did here.
I am just impressed.

Too bad I can't pretend having posted at least 25 useful posts. As I am total newbie, it's impossible to have that ratio.

Hope everything goes fine for you, and you come out of the depression.

[disinfetor]

THIS TOPIC IS ABSOLUTE. DONT PM ME FOR IT. PLEASE SEE MY LAST SW.

http://cartechnology.co.uk/showthread.php?tid=7981

[iridis]

Nothing worse than losing a HDD full of an ongoing piece of work.

Is the drive 'dead' or clicking?
I've been known to be able to on occasion recover dead drives.

If there is anything I can do to help just gimme a nod.

Keep sane.... Depression can run away if you dont!

[iridis]

Hope you got it all sorted again

Was looking at your large txt file

I have a C3 mux - I could do with making it a USB mux if you are willing to share the info.

If not TY for all your work so far - pity about UR HDD